Home > Products > Electronics & Electricity > Electronic Instrument > Electronic Measurment Apparatus

Brand Name : Jinhan

handheld   oscilloscope

Characteristics

 

Designed according to the deb ing and repair requirements of lots electronic engineers. 

 

Contains a built-in-lithium battery and works without external power supply                       

 

Oscilloscope and Multimete, Easy for carrying, especially for field application                                       

 

Three Trigger System Mode: Auto, Normal and Single                                          

 

Lock waveform on the screen and save non-periodical signal

 

 

 

Technologyfeatures

 

 

 

Scope indicator:

 

Input coupling: AC, DC

 

Input impedance: 1MΩ+2%   20pF+5pF

 

The maximum input voltage: 40 v (X1 probe); 400 v (probe X10) measurable voltage 220 v; (probe X100) 1000 v voltage can be obtained

 

Probe attenuation: 1X, 10X

 

Set the probe attenuation factor: 1X, 10X, 100X

 

Sampling Method: Real-time sampling, random sampling

 

Memory depth: 16K

 

Acquisition Mode: Sample, Peak Detect

 

Vertical Sensitivity: 10mV-5V (Probe 1X), 100mV-50V (probe 10X), 1V-50V (probe 100X) (1, 2. 5, 5 step)

 

Vertical accuracy: +/-3%

 

Vertical resolution: 8bit

 

Bandwidth: 50MHz

 

Real-time sampling rate:500MSa/s

 

Horizontal scan range: 10 ns - 50 ms (1, 2.5, step 5), 100-5 s ms Scan (Scan)

 

Three Trigger System Mode: Auto, Normal and Single

 

Type: Rising edge trigger, falling edge trigger

 

Automatic detection: Support (50Hz-60MHz)

 

Math:CH1+CH2, CH1-CH2, CH2-CH1

 

Cursor measurements: Support time and voltage cursors

 

Measure: Amplitude, frequency, duty cycle, cycle

 

 

 

Multimeter indicator:

 

Max display 5999

 

DCV: 600.0mV/6.000V/60.00V/600.0V/1000V

 

ACV:600.0mV/6.000V/60.00V/600.0V/750V

 

DCA: 60.00mA/600.0mA /6.000A/10.00A

 

ACA: 60.00mA/600.0mA /6.000A/10.00A

 

OHM: 600.0Ω/6.000kΩ/60.00kΩ/600.0kΩ/6.000MΩ/60.00MΩ 

 

Cap:  40.00nF/400.0nF/4.000uF/40.00uF/400.00uF/4000uF

 

Diode Testing: 0V~2.0V

 

Continuity Buzzer: Below 30Ω~600.0Ω

 

 

 

Generaldescription

 

 

 

Display:4.3 -inch 16-bit true color TFT 400 * 272   

 

Low-Voltage Display

 

Overload protection

 

Data Hold

 

Back Light

 

Power supply: Section 3000 + mA lithium batteries (single battery for 4 hours)

 

Product size: 220X128X37mm

 

Product Weight: Around 600g

 

Standard Accessories:meter (incl. battery) gift box, test lead, manual, Oscilloscope Accessories (hook pin & probe & Alligator Clip & Battery charger)