Bulldozer with front loader
Product Description
| MODEL |
SN-306L-M |
| OVERALL DIMENSION |
mm |
| Overall length (with/without loader) |
2200/2960mm |
| Overall width (with/without loader) |
1430/1740mm |
| Overall height to top of ROPS |
2160mm(can be adjusted to 2260mm) |
| PERFORMANCES |
|
| Operating weight |
3130KGS |
| Max. drawbar pull |
26.8KN |
| ENGINE |
|
| Model |
TY395IT |
| Bore |
95mm |
| Stroke |
105mm |
| Cylinders |
3 |
| Max. power / rpm |
22.1kW / 2000rpm |
| Output volume |
2.23 L |
| Fuel |
Diesel |
| Optimum fuel consumption |
≤243g / kWh |
| Optimum engine oil consumption |
≤1.63g / kWh |
| Lubrication |
Full pressure by rotary pump |
| DESIGN SPEED |
Km/h at maximum power output |
| Forward - Low 1 |
0.86km/h |
| Forward - Low 2 |
1.09km/h |
| Forward - Low 3 |
1.77km/h |
| Forward - Low 4 |
2.81km/h |
| Forward - High 1 |
3.38km/h |
| Forward - High 2 |
4.27km/h |
| Forward - High 3 |
6.95km/h |
| Forward - High 4 |
11.02km/h |
| Reverse - Low |
0.81km/h |
| Reverse - High |
3.16km/h |
| TRANSMISSION |
|
| Clutch |
Single dry disk, diaphragm-spring clutch, 10", pedal control |
| Gearbox |
2-shaft, 8 forward + 2 reverse, sliding gear shift |
| Main drive |
Spiral bevel gear |
| Final drive |
Externally meshed spur gear |
| 4 IN 1 FRONT LOADER |
|
| Rated loading capacity |
550KG |
| Volume of the backet |
0.3m³ |
| Bucket dump height |
2200mm |
| Dumping distance |
550mm |
| bucket lifting angle |
45 ° |
| bucket tilt angle |
46 ° |
| bucket deep |
140 mm |
| working pressure |
16MPa |
| Loader Lifting time |
7s |
| Loader descend time |
<4s |
| UNDERCARRIAGE-ROLLERS |
|
| Ground clearance |
240mm |
| Track frame |
Semi-rigid |
| Steel Track rollers (each side) |
5 + 2 |
| Track recoil system |
Helical spring, screw adjusted |
| Number of Shoes (each side) |
44(pitch = 109mm) |
| Steel Track |
|
| Track width |
290mm |
| Track guage |
1150mm |
| BRAKES & STEERING |
|
| Steering Clutches |
Multiple dry cerametallic disk clutches, pedal control |
| Brakes |
Band brakes, pedal control |
| HYDRAULIC SYSTEM |
|
| Pump / model |
Gear type / CBN-E314L |
| Relief valve pressure |
16MPa (2230psi) |
| Control valve |
5-spool |
| Loader Control |
|
| (4 in 1 only) Control - Open/angle |
Right - hold - left |
| Hitch linkage |
Rear 3-point hitch, Category 1 |
| 3 point hitch upper pinhole |
φ19x44 |
| 3 point hitch lower pinholes |
φ22x35 |
| ELECTRICAL SYSTEM |
|
| System voltage |
12V |
| Self-rectifying alternator |
200W |
| Starter |
3kW |
| Battery |
105Ah (maintenance free type) |
| Front head lamp |
55W (Qty 2) |
| Rear lamp |
55W (Qty 1) |
| POWER TAKE-OFF |
|
| Type: |
Mechanical dependant |
| Engagement - 540rpm |
1812 Engine rpm |
| Engagement - 1000rpm |
1772 Engine rpm |
| Shaft diameter |
35mm (1 3/8"), 6 splines |
| Direction |
clockwise |
| REFILL CAPACITIES |
|
| Fuel |
45 Ltr (11.7gal) |
| Engine oil sump |
6 Ltr (1.6gal) |
| Gearbox |
11 Ltr (2.9gal) |
| Hydraulic system |
30 Ltr (7.8gal) |
| Coolant |
9 Ltr (2.3gal) |
| Final drives (each) |
2 Ltr (0.5gal) |
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
