Home > Products > Electronics & Electricity > Electronic Instrument > Test Bench

GZ-018 while pressure / ring compression testing machine

The main function:
The machine with high precision sensor senses, through analytical software to digitally sample showed strength for a thickness of corrugating medium and kraft paper of 1mm or less and so on. Central pressure sample is placed inside the fixture to test its compressive strength of the machine direction of the upright, with a variety of attachments can be tested cardboard ring crush strength, compression strength, flat crush strength, adhesion strength, compressive strength and other tests project.

Implementation of the standards: ISO, GB / T 2679.8-1995 "Paper and cardboard ring crush strength determination", GB / T 6546-1998 "corrugated board edge crush strength determination", GB / T 6548-1998 "corrugated board adhesive strength Determination ", GB / T 2679.6-1996" corrugated paper flat crush strength determination "and other standards of the regulations and requirements.
Technical Parameters:
Measuring range: 0-200kg
Resolution: 100000
Indication accuracy: indication error of ± 1%, showing the value of variability ≤1%
Display: LED digital display
Test speed: 12.7mm / min
Plate: 100cm²
Unit: Kg, N, LB switch
Sample Size: 152.4 × 12.7mm
Compression spacing: 100mm
Printing: You can print the highest value, lowest value, average value, the system automatically conversion
Effective distance: 150 mm
Weight (approx.): 50kg

GZ-019 paper ring crush strength tester

The main function:
    The paper ring crush tester is mainly applied to a thickness of 0.15 ~ 1.00mm paper ring crush strength (RCT); corrugated board compression strength (ECT), flat compressive strength (FCT), bonding strength (PAT) and a diameter of less than 60mm paper core flat crush resistance (CMT) and other tests, is currently very high cost of a high-precision paper ring crush strength tester.

Implementation of the standards: ISO, GB / T 2679.8-1995 "Paper and cardboard ring crush strength determination", GB / T 6546-1998 "corrugated board edge crush strength determination", GB / T 6548-1998 "corrugated board adhesive strength Determination ", GB / T 2679.6-1996" corrugated paper flat crush strength determination "and other standards of the regulations and requirements.

Technical Parameters:
Measuring range: 5 ~ 3000N
Accuracy: ≤ ± 1%
Resolution: 0.01N
Platen parallelism: ≤0.05mm
Test speed: 12.5 ± 1mm ​​/ min
HMI: 3.2in 320 * 240 dot matrix LCD
Printout: modular integrated thermal printer
Working environment: temperature (20 ± 10) ℃, humidity <85%
Weight: 40kg

GZ-021 corrugated board adhesive / release clamps

The main function:
Corrugated board peel strength test stand is measured adhesive strength of corrugated board (PAT test) necessary special test equipment. Test stand by the pin holder (each flute General), the pins frame (A, B, C flute each one) composed of upper and lower pin, easy to operate, without adjustment, applicability, and other characteristics can be widely suitable for corrugated cardboard (box) production, scientific research and product quality supervision and inspection departments corrugated cardboard single peel test.

Technical Parameters:
Applicable leng: A / B / C flute
Pin Diameter: φ3mm (A flute), φ2mm (B, C flute).
After loading the sample maximum dimensions (length × width × height, mm): 100 × 50 × 45.
Working environment: temperature (20 ± 10 ° C), humidity <85%

GZ-022 cyclic pressure center plate

The main function:
    The essential tool for the thickness of the paper and cardboard fixture ring crush strength test 0.15mm-1.00mm, and is suitable for cardboard production industry, packaging industry, commodity inspection, research centers for paper, paper for ring crush strength of the physical properties of the test sample .

GZ-023 ring crush sampler

The main function:
     Central pressure special sampling tool is used for cardboard ring crush strength test (nCT) and corrugated paper flat crush test (CMT) dedicated sampling precision knife,
The sampling knife with a sample taken has a high dimensional accuracy and geometric accuracy. Therefore, the use of compression tester and flute instrument must be equipped with this sampling knife.
The sampling knife in line with GB / T2679.8 "Paper and cardboard ring crush strength determination" and QB / T1671 "paper and cardboard physical performance test dedicated nibbler
General technical requirements "and other standards.
Technical Parameters: 
Sample size: 152 ± 0.2 × 12.7 ± 0.1mm
Two long edge parallel: ≤0.015mm
Sampling thickness: (0.1 ~ 1.0) mm
Dimensions (length × width × height): 440 × 140 × 360mm
Weight: 20kg

GZ-024 side pressure sampler

The main function:
While pressure / adhesive strength test and sampling is necessary corrugated board adhesive strength test side pressure dedicated sampling devices, can quickly and accurately cut the sample size of the provisions, corrugated board and carton production, research and quality supervision and inspection assist other departments ideal test equipment.
Technical Parameters:
Sample size: ECT (100 * 25) mm; PAT (80 * 25) mm
Sample thickness: ≤10mm
Sampling error: ± 0.5mm
Working environment: temperature (20 ± 10 ° C), humidity <85%
Weight: 30kg