Home > Products > Sports & Recreation > Sport Products > Travel,Outdoor & Camping

1. Extruded 4-groove aluminium hollow profiles. All aluminium components technically anodized.
2. High strength Aluminium Alloy 6061/T6(13HW). aircraft grade and oxygenation on the surface.
3. All steel parts are well hot-dip galvanized.
4. Modular character for diverse combination and expansion. Trouble-free transport, storage and   maintenance.
5. All system components are standard stocked parts for fast availability.

1. Textile covers made of polyester fabric, coated with PVC on both sides, weight approx.850g/sqm. 
2. Extremely durable and made of stable polyester material that is easy to clean and resistant  to  scratches. 
3. Can be supplied with or without windows or can come with translucent or transparent sections.
4. Flame-retardant according to DIN 4102, fire class B1, M2. 

event   tent

Width (m)×Length(m)

Eave height (m)

Ridge height (m)

Aluminum main profile

8×10

2.5

4.1

120×68×3mm

9×10

2.5

4.3

120×68×3mm

10×10

2.5

4.5

120×68×3mm

12×10

2.5

4.7

120×68×3mm

Middle event  tent

Width (m)×Length(m)

Eave height (m)

Ridge height (m)

Aluminum main profile

10×10

4

5.8

166×88×3mm

12×10

4

6.0

166×88×3mm

15×10

4

6.5

166×88×3mm

18×10

4

7.0

166×88×3mm

1. Allowed temperature condition: -30 degree Celsius~+70 degree Celsius. 
2. Easy to be assembled and dismantled, removable.
3. No pole inside, 100% room is available.
4. Sizes can be customized(like side/leg height).

   3. Optional accessories for shelter tent 

5. covers: colorful cover, transparent cover, inflatable roof cover
6. sidewalls: glass wall,PVC hard wall, sandwich pannelled wall, fiber glass wall
7. windows: dome or square clear PVC windows, mesh window, glass window 
8. doors: double-swings glass door, single-swing glass door, glass fire door, hard PVC door, rolling door 
9. wooden flooring system 
10. rain gutters (inner roof beam rain gutter or rain gutter between two tents)
11. drapers, curtain, lighting, AC, carpet, etc.

    4.Optional Fixing methods for event tent 

    Tents can be erected on the site without special requirements for the ground types, all the common ground types such as sand, lawn, asphalt, concrete and tile floor are OK for you to set up the tents. But tent fixing methods are different for different terrain conditions and usage of tents. As the leading brand in China, WT Tent provides you four tent fixing methods.

     

12.  Concrete floor (temporary solution)

13.  

    General speaking, you can fix the tent base plates by expandable bolts on concrete and asphalt floor (at least 25cm thick). It’s a simple fixing method that can fix the tents very well, but the expandable bolts will do some damages to the concrete or asphalt floor, so you need to pre-consider whether the ground is allowed to be destructed or not.

     

14. Lawn or soil (all soft-base ground)

15.  

    This fixing method mainly applies to soft ground types like sand, soil or lawn, and is usually used in outdoor lawn wedding tents, tents erected in parks etc. We use the steel pegs (ground anchors) to fix the tent firmly on the ground, and you just need to fill the small holes in the ground after the tents and pegs are removed.

     

16. All damage-avoid ground

17. This fixing method is usually for the ground types such as marble or tile floors which are difficult to repair after damages. We use the weight plates to suppress the tent base plates by putting sandbags, concrete blocks or stones on the weight-bearing parts of the weight plates. Using this method will do no damages to the ground, but it needs more space to place the weight plates, and it looks relatively not as aesthetic as the tents fixed by expandable bolts or steel pegs.

     

18. Concrete Base (permanent fixing solution)

19.  

    This fixing method is for long-term permanent usage of tents, mainly for long-term usage of storage tents, workshop tents etc. If adopting this method, you also need to drill holes in the concrete base and fix the tent base plates with expandable bolts, and then you can cover the tent base plates with concrete.

     

    Packaging & Shipping

    5.Professional Packing for event tent

20. Aluminum frame packed in membrane film 
21. Hardware packed in solid carton box 
22. PVC covers are packed in professional PVC carry bag 
23. Customized package

    Suzhou WT Tent Co., Ltd

                    

    Manufacturer of High-quality Aluminum-Alloy Structure Tent

        Professional Design, Sale, Manufacture and Rental Service

     

    Company Profile

     

24. Suzhou WT Tent Co., Ltd is a professional manufacture of Aluminum-Alloy Structure Tent in China. Our tents are widely used in Exhibition (Art Festival, Beer Festival and Catering Festival),Temporary Workshop or Warehouse, Urgent Events, etc.
25. WT’s tents are produced according to DIN Standard. All tents are easily to set up. We provide our customers a beautiful roomage based on a safe and strong structure. 
26. Suzhou WT Tent Co., Ltd consists of a professional design team, R&D engineers and high-grade technicians. Owing to the belief of ‘Sincerity, High-Quality and Innovation’, we are trying our best to provide our customers the best products and service.

27.