Home > Products > Industrial Supplies > Construction Machine

EN standard 10kg hammer Dynamic Penetrometer Light DPL

The DCP (Dynamic Cone Penetrometer) is an instrument designed for the rapid insitu measurement of the structural properties of existing road pavements constructed with unbound materials. Continuous measurements can be made down to a depth of approximately 850mm or when extension shafts are used to a recommended maximum depth of 2m. Where pavement layers have different strengths the boundaries can be identified and the thickness of the layers determined. Correlation's have been established in earlier work (Van Vuuren 1969, Kleyn and Van Heerden 1983, Smith and Pratt 1983) between measurements with the DCP and CBR (California Bearing Ratio) so that results can be interpreted and compared with CBR specifications for pavement design. A typical test takes only a few minutes and therefore the instrument provides a very efficient method of obtaining information that would normally require the digging of test-pits.

Model 16-T0012/B FEATURES:
• Portable, hand-operated equipment.
• To obtain a direct evaluation of the “in-situ” strength properties of road pavement layers: the DCP has been correlated with CBR (California Bearing Ratio - Kleyn 1975).
• Field calibration of a portable dynamic cone penetrometer was made to determine a penetration resistance
relationship with the standard penetration resistance.
• The penetrometer has been found useful in the inspection of footing foundations and for light field
exploration where the standard penetration range of limits is generally known
• One year warrantee against any manufacturing defects.

Comprises :
16-T0012/B1 Hammer, 10 kg
16-T0012/B2 Anvil with rod and full travel impact plug, 6 kg
16-T0012/B3 11 threaded sounding rods dia. 22 mm x 1000 mm long
16-T0012/B4 Drive conical point, 500 mm2 area, 25.2 mm dia, 90° angle
16-T0012/B5 Drive conical point, 1000 mm2 area, 35.6 mm dia, 90° angle
16-T0012/B6 Base plate with seating for scale
16-T0012/B7 Rule graduated in mm, 1 m long
16-T0012/B8 Lever device for rod extraction
16-T0012/B9 Alloy aluminum carrying case
Dimensions: 1080x310x150mm
Gross Weight inclue case: 80 kgs
Access ories and spare parts : (need to be ordered seperately)
16-T0012/A7 Extension rods: 400 mm, dia. 16mm
16-T0012/B10 Spare expendable conical point, 1000 mm2 area, 35.6 mm dia, 90° angle