| Model: | - |
|---|---|
| Brand: | senggang |
| Origin: | Made In China |
| Category: | Security & Protection / Alarm |
| Label: | - |
| Last Online:15 Mar, 2022 |
| Specifications: | CK-7110 home alarm (8 led) 1,telephone alarming controller (10 group) 2,inactive infrared intruding detector (up to 10) 3,wireless magnetic detector (up to 10) 4, cordless remote controller (two or more) 5, have 10 group dialing (two time in turn), voice alarm and live monitor 6, remote control and emergency alarm 7,moniter the voice in home when alarm --------------------------- The GK-7110 consists of a) base unit with alarming controller and telephone plug. b) 2 remote controllers c) connected 220v AC cable, with AC plug d) Wireless Infra Red Detector + Plastic base for wall hanging. e) Wireless Magnetic door detector f) Instructions ----------------------------------- HOW WE ENTER THE PHONE NUMBERS TO DIAL? The system have the phone plug under bottom, please link to phone line, put to power supply, and pick up the phone (which have also link to same phone line to post bureau), now you can program it: the lamp on panel will all height on. Waiting for you for 30 second. 1 .to program phone number into the system you can dial: 1 # - - - - - #; 2 # - - - - #; ¡¡ 9 # - - - - #, (when you dial any number, there is a whisper, that is say the number has been saved into the system, when you end the one group phone number after #, a longer whisper will be hear. You can program 9 group phone number into the system .If you wand to change the phone number in the any group, please redo it as above.) 2. When you set Wireless Infra Red Detector in the system, you can dial the number 1 * , then, open the power of Wireless Infra Red Detector, the system will send out a whisper, it is ok. 3 when you set Wireless Magnetic door detector in the system and dial the number 2 * , then, make Wireless Magnetic door detector work, the system will send out a whisper also. It is ok too. 4. Two of the remote controller have set into the system, you don¡¯t need to set again, but if you want to set, you can do as this: dial the number 3 * , then, push the emergency button (C) on the first remote controller, the system will send out a whisper, and dial the number 4 * , then, push the emergency button (C) on the second remote controller, the system will send out a whisper also. 5. When you dial the number 0 * 2, the system is set to be first sound out 15 second voice alarm, then redial the phone number set in the system, group 1 to 9, (If you have set to). Two times in turn. This has enough time for you to decide that it is needed to dial or not; when you dial the number 0 * 1, the system is set to be first redial the phone number set in the system, then sound out 15 second voice alarm, also two times in turn. This is for the emergency call. 6. When you end the system set, after 15 second, you can test the system 7. The remote controller has four buttons; one of them can make an emergency call note: when every first time power on, the system will waiting for you to program the phone number, and the lamp on panel will all height on. If you not do this again, please wait 30 secend, and then you can test it. HOW WE CAN DEACTIVATE THE SIREN SO ONLY DIAL TO OCCUR IF ALARM IS ACTIVATED? ----------------------- Use the remote controller to interrupt it. --------------------------- FOB prices (for minimum order quantity)---------38 usd Minimum order quantity--------------------------100 set Sample availability/cost------------------------58 for ten set /each International standards met---------------------ok Delivery time-----------------------------------20 day |
|---|---|
