Usage Range of Jaw crusher:
Mainly for various ore and bulk material for medium size of the broken, widely used in mining, smelting, building materials, roads, railways, water conservancy and chemical industry. crushing strength 320MPA available for various material.
Advantage of Jaw Crusher:
A，Large crushing ratio
B， Uniform product size
C，Simple structure
D，Reliably work
E，Simple maintenance
F，Low operating expenses
Working principle of Jaw Crusher:
Jaw crusher working part of the machine is two jaw plate, fixed jaw plate (Ding E), vertical (or the upper end of the slightly decumbent) fixed on the front wall of the body, the other is movable jaw (jaw) and inclined position, and the fixed jaw plate formed on a small crushing cavity (cavity). The movable jaw plate is a periodic movement of the fixed jaw plate, sometimes separated from the fixed jaw plate. When the material is separated into the crushing chamber, the finished product is discharged from the lower part; the material is close to the material, which causes the material to be loaded in the two jaw plate to be squeezed, bent and split.
Performance features of Jaw Crusher:
1, the structure is more reasonable, more convenient, more stable and reliable operation.
2, the size of the material is big, the crushing ratio is bigger, the output is higher.
3, low noise, low energy consumption, low cost, low maintenance costs.
4, the body uses multi - layer multi-channel welding, the elimination of internal stress treatment process, the strength is stronger.
5, precision machining and assembly process, the inner quality is more secure.
6, multi layer labyrinth sealing process, bearing a longer life.
7, new lock technology, maintenance time is shorter.
8, the configuration of advanced lubrication technology, maintenance more convenient.
Note of Jaw Crusher:
Before use should check all parts of the fasteners, especially the lubricating parts and the bolts, the lubricating parts must keep enough oil, loose bolts tighten, then clean up the broken cavity residue, and then boot production. In the normal work pay attention to feed evenly, not a sufficient, multi don't add, too much can cause mechanical blockage. Moving jaw plate, static jaw plate, on both sides of the plate, the roof for wearing parts, pay attention to maintenance.
