Model: | i712A |
---|---|
Brand: | InMax |
Origin: | Made In China |
Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
Label: | Gigabit Fiber Optic , Gigabit Industrial E , Gigabit Ethernet Swi |
Price: |
US $420
/ pc
|
Min. Order: | 10 pc |
Last Online:22 Apr, 2015 |
i712A 4G+8GE full Gigabit managed Industrial Ethernet Switches
Introduction
The i712A series managed Industrial Ethernet switches are equipped with up to 12 Gigabit Ethernet ports. The “InMax Ring” redundant Ring (recovery time < 20ms), RSTP/STP can increase system reliability and your network availability. Industrial-grade design with -40 to +75°C operating temperature and redundant power inputs. The super hardware reliability is especially suitable for industrial applications.
Features and Benefits
☉ Up to 12 Gigabit ports(4 100/1000BaseX SFP ports and 8 10/100/1000BaseTX ports)
☉ Command Line Interface (CLI) for quickly configuring major managed functions
☉ InMax Ring Protocol “InMax Ring” (recovery time < 20 ms), RSTP, STP and MSTP for network redundancy
☉ IGMP snooping and GMRP for filtering multicast traffic
☉ Support up to 16k byte Jumbo Frame
☉ Support 8K MAC address
☉ Max. Number of Available VLANs: 4094
☉ Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
☉ DHCP Option 82 for IP address assignment with different policies
☉ Support port mirroring
☉ Support traffic control of multicast and broadcast
☉ QoS and ToS/DiffServ to increase determinism
☉ Port Trunking for optimum bandwidth utilization
☉ SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
☉ SNMPv1/v2c/v3 for different levels of network management
☉ RMON for efficient network monitoring and proactive capability
☉ Bandwidth management prevents unpredictable network status
☉ Lock port function for blocking unauthorized access based on MAC address
☉ Automatic warning by exception through e-mail, relay output
Specifications
Technology
Ethernet Standards:
☉ IEEE 802.3
☉ IEEE 802.3u
☉ IEEE 802.3z
☉ IEEE 802.3ab
☉ IEEE802.3-2005 Clause 58/59
☉ IEEE 802.1X (Security)
☉ IEEE 802.3x (Flow Control)
☉ IEEE 802.3ad (Link Aggregation)
☉ IEEE 802.1D (STP)
☉ IEEE 802.1w (RSTP)
☉ IEEE 802.1s (MSTP)
☉ IEEE 802.1Q (VLANs)
☉ IEEE 802.1Q (GVRP/GARP)
☉ IEEE 802.3ac (VLAN Tag Frame Extension)
☉ IEEE 802.1p (CoS)
Administration Protocol:
☉ RFC 826 (ARP)
☉ RFC 1812 (IPv4 Router)
☉ RFC 783 (TFTP)
☉ RFC 768 (UDP)
☉ RFC 791 (IP)
☉ RFC 792 (ICMP)
☉ RFC 793 (TCP)
☉ RFC 2474 (Diffserv)
☉ RFC 2131 (DHCP)
☉ RFC 2267 (Network Ingress Filtering)
☉ RFC 1156 (TCP/IP MIB)
☉ RFC 1212 (Concise MIB definitions)
☉ RFC 1213 (MIB for Network Management of TCP/IP based internets (MIB II)
☉ RFC 2618 (Radius Authentication Client MIB)
☉ RFC 2620 (Radius Accounting MIB)
☉ RFC 2765 (Stateless IP/ICMP Translation Algorithm)
☉ RFC 2819 (Remote Network Monitoring MIB (group 1,2,3,9)
☉ RFC 1757 (RMON (groups 1 2 3 and 9)
☉ RFC 1157 (SNMP)
☉ RFC 1902 (SNMPv2)
☉ RFC 1901 (Community based SNMPv2)
☉ RFC 2271 (SNMPv3 Architecture)
☉ RFC 2573 (SNMPv3 Applications)
☉ RFC 2576 (Coexistence between SNMP V1, V2, V3)
☉ RFC 854 (Telnet)
☉ RFC 896 (Congestion control in IP/TCP network)
☉ RFC 1122 (Requirements for Internet Hosts)
☉ RFC 2597 (Assured Forwarding PHB group (partial support)
☉ RFC 2865 (Remote Authentication Dial In User Service)
☉ RFC 2869bis (Radius Support for Extensible Authentication)
Ethernet Specifications:
☉Store and forward mode: Non-blocking switching
☉Switch fabric:24Gbps
☉Support up to 16k byte Jumbo Frame
☉Support 8K MAC address
☉Support MAC address black hole
☉Support MAC address learning limit
☉Support port-based VLAN
☉Support 802.1Q VLAN (4K VLANs)
☉Support protocol-based VLAN
☉Support GVRP/GARP (Generic VLAN Registration Protocol)
☉Support VLAN isolation (16)
☉Support VLAN translation
☉Support VLAN VPN (QinQ)
☉Support LACP
☉Support static link aggregation
☉Support up to 16 aggregation groups and up to 8 ports per group
☉Support 802.3x in full duplex mode
☉Support back pressure in half duplex mode
☉Discovery remote base on link layer
☉Auto shutdown individual ports upon fault signals
☉Auto-detection interval can be set
☉Support STP/RSTP, Support MSTP
☉Support IGMP snooping v1/v2/v3
☉Support static multicast groups
☉Support DHCP client
☉Support DHCP snooping
☉Support DHCP relay option82
☉Support hierarchical management and password protection of users
☉Support IEEE 802.1X authentication
☉Support centralized MAC address based authentication
☉Support traffic classification based on source MAC address, destination MAC address, source IP address, destination IP address, Layer 4 port, protocol type, VLAN, and so on
☉Flow-based traffic rate limit
☉Support flow-based priority tag
☉Flow-based redirection of packets to another port
☉Flow-based traffic statistics
☉Support SP/WRR/SP+WRR queue scheduling
☉Support flexible port mirroring, up to 4 port mirroring groups, monitoring network traffic by sending copies of all incoming and outgoing packets from the mirroring ports to a monitoring port.
☉Support port traffic shaping
☉Support congestion avoidance and drop policies
☉Support locally / remotely management via CLI, SNMP, Web and Telnet, Console port
☉Support Simple Network Management Protocol (SNMP) v1/v2/v3
☉Support Remote Monitoring (RMON) 1/2/3/9 groups of MIBs
☉Support system log, hierarchical alarms
☉Support SSH v2
☉Support power supply/fans/temperature of IC/ status detection and alarms
☉Support Deb ing Information Output
☉Support remote maintenance through Telnet
MIB:
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB,
RSTP MIB, RMON MIB Group 1,2,3,9
Flow Control:
IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
MAC Table Size: 8K
Max. Number of Available VLANs: 4094
VLAN ID Range: VID 1~4094
IGMP Snooping Groups: 256
Packet Buffer Size: 512Kb
Jumbo Frame Size: 16Kb
Interface
Fiber Ports: 1000BaseSFP slot
RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed
Console Port: RS-232
Button: Reset button
LED Indicators:
System indicator: SYS
Power indicator: PWR
Interface indicator:
SFP Ports: Link/ Act G1,G2,G3,G4
RJ45 Ports: LinkG5~G12, ActG5~G12
Alarm Contact:
1 relay output with current carrying capacity of 1 A @ 24 VDC
Power Requirements
Input Voltage: 24VDC(12 to 36VDC),redundant dual inputs
Connection: 6-contact terminal blocks
No-load Power: 3.0W@24VDC
Full Load Power: <0.24A@24VDC, <6W
Overload Current Protection: Present
Reverse Polarity Protection: Present
Redundant protection: Present
Physical Characteristics
Housing: IP40 protection, High strength aluminium profile
Installation: DIN-rail mounting, wall mounting
Weight: 750g
Dimensions(W x H x D):60.2 mm x 138.5mm x 112.5mm
Environmental Limits
Operating Temperature:
Standard Models:-25 to +60°C
Wide Temp. Models:-40 to +75°C
Storage Temperature:-40 to +85°C
Ambient Relative Humidity:5 to 95% (non-condensing)
Industry standard
EMI:FCC Part 15,CISPR (EN55022) class A
EMS:EN61000-4-2 (ESD),Level 4
EN61000-4-3 (RS),Level 3
EN61000-4-4 (EFT),Level 4
EN61000-4-5 (Surge),Level 4
EN61000-4-6 (CS),Level 3
EN61000-4-8,Level 5
Shock:IEC60068-2-27
Freefall:IEC 60068-2-32
Vibration:IEC60068-2-6
Warranty
Warranty Period: 5 years
Details:See InMax
Certifications
CE,FCC,RoHS,UL508(In authentication)
Please check InMax’s website for the most up-to-date certification status.
Dimensions
Payment Terms: | TT |
---|---|