Home > Products > Electronics & Electricity > Other Electrical & Electronic

KF860 is a compact bi-amplification module for line array system. Reproduction for low frequency is handled by two 10" cone speakers.  High frequency is assigned to a compression driver, which utilizes a 1.5"  exit throat and 3" titanium diaphragm. The driver is coupled with an acrylic wave adaptor, which allows an even wave performance. This adaptor provides also a heat sink for the driver. The 120°angle between the two 10" speakers is another unique technology, which leads to high flux density and to enhancement of sound pressure. 
     Quality 2-in-1 aluminum frames make the system suitable for different venues – indoor or outdoor.  And provides protection against bump and abrasion during the mobile performance.  The enclosure of KF860 is made by quality birch plywood with fiberglass, painted with epoxy polyurethane anti-scratch finish. It's all weather proof.  It's also equipped with dolly for easy flying. Integrated hanging hardware provides for splay angles from 0°to 6.0°with an increment of 1.5°, providing a seamless array.     

Type...........................................Mid-Hi Long Throw 
Component.................................MF：10"×2；HF：3"×1
Nominal Impedance....................8Ω；MF：4Ω；HF：8Ω
RMS Power Handling................ MF：600W；HF：300W
Peak Power Handling..................MF：1200W；HF：600W
Frequency Response..................140Hz-20KHz
Sensitivity（1W/1M）..............114dB
Max. SPL....................................145dB
Diving Mode........................... Bi-Amp
Recommended Amp............... I2  for  2pcs  HF
                                                    I4  for  2pcs  MF
Recommended  Controller....TASSO DSP360
Dispersion..................................110°H × 8°V
Conector.....................................2×NL4
                                                    MF：1+/1-；HF：2+/2-
Horn throat size........................1.4"(35mm)
Voice coil size...........................3"(75mm)
Dimensions HWD（mm）........380×945×490
Shipping HWD（mm）.............490×1060×610 (0.32CBM)
NW/GW（Kg）.........................60.5/63.5