Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Non-metallic Mineral Products

Abrasive Hex lining mat as wear ceramic liner widely used in thermal power, iron and steel, metallurgy, mechanical, coal, mine, chemical, cement and other industries

1.Sample brief introduction:
> Item:Alumina Ceramic Hex on Silk Mat
> Sample size:6mm hex ceramics on silk (121*121mm)
> Sample:Available
> Materials:92% Al2O3 or 95% Al2O3
> Density:3.60 or 3.68
> Moh's:9 scale
> Application:Wear Resistant
> Other hex ceramic size :Hexagonal tile S12xT3mm, S12xT6mm, S12xT12mm, S12xT20mm
> Finished ceramics size :120*120mm , 150*150mm, 300*300mm, 500*500mm on Nylon Net /sick back /paper back
> OEM/ODM:Acceptable
> HS Code:6909120000


2.Raw Material:

The wear resistance ceramic liner products are made from the high purity, super fine and single narrow particle high-quality grain alumina powder, which is spray-dried processing, formed by cold isostatic pressing, firing on 1520 º C~1650 º C temperature. Subject to Al2O3 content difference, we have 92%, 95%,abrasion resistance ceramics.

3. Advantage of the material:
1)High hardness:
Its rockwell hardness is HRA80-90 and the Moh's hardness is up to 9 grade with is only less than diamond.And its abrasion-resistant is more better than steel and stainless steel;
2)Superior Abrasion-resistance
Its abrasion-resistance is 171.5times of Chrome steel and 260 times of manganese steel materials and as per our customers' feedback, it could prolong the use life of equipment for more than 10years under same working conditions.
3)Light weight
Its density is 3.6-3.75g/cm3, it is only half weight of steel, and could reduce the load on equipment.