Advantages of stainless steel punching chain plate:
1, health type, fully meet the requirements of food grade standards
2, high temperature resistance, the maximum temperature of 1250 degrees.
3, not afraid of wet, not afraid of water, can be soaked in water, completely deformed, do not rust.
4, with a chain drive, no deviation, no deformation.
5, the chain board can be based on customer requirements of various diameter of the round hole, in order to meet the needs of the customer's production.
6, the chain plate service life is long, almost no maintenance rate.
Customer order stainless steel punching chain board required data:
1, conveyor chain length, width.
2, the weight and volume and shape of the material transported by the chain plate
3, the chain of pitch and roller size, often with the chain is 25.4 mm, pitch 31.75 mm, pitch 38.1 mm, pitch 50.8 mm, pitch 76.2 mm.
4, the diameter and material of the support shaft, is commonly used in diameter 5.0,6.0,7.0,8.0,1.0,12.0,20.0 mm diameter branch.
5, plate thickness and material, the most commonly used is the thickness of 1.0-5.0 mm plate.
6, the size and density of holes and the distribution of the situation
Pitch by pitch:
31.75mm chain plate conveyor belt (stainless steel chain plate) single row of the ultimate tensile load 22KN, suitable for small mechanical or short distance transport.
38.1mm stainless steel chain plate (chain plate conveyor belt) single row of the ultimate tensile load 32KN, suitable for short distance transport.
Pitch 50.8mm stainless steel single row of the ultimate tensile load 58KN, mechanical strength, suitable for large and medium machinery and long-distance transmission.
Chain plate characteristics:
Chain plate mesh belt is very strong, chain driven, for medium and large load transport. Steel plate bending forming hinge, pivot hinge and the chain will use together.
The ends of the chain can be used to fix the washer or cotter pin, cotter pin use convenient disassembly, convenient maintenance.
Chain plate mesh belt is mainly used in the following aspects: die casting, low temperature furnace, iron removal, forging, cooling conveyor, recovery and lifting machine, tunnel freezer etc.
Chain plate mesh belt features: 1 to 6 mm thick, the edge of the chain, the pitch from 25.4 mm to 228.6 mm,
Carbon steel or stainless steel (stainless steel 3 mm thick),
The chain plate punching hole diameter: 1.5mm-20mm square hole of long hole pore scale etc.
Stainless steel or cast iron chain wheels, which can be customized with either the edge baffle or the lateral baffle plate.
