| Model: | OMP |
|---|---|
| Brand: | danfoss EATON |
| Origin: | Made In China |
| Category: | Industrial Supplies / Machine Hardware / Hydraulic Parts |
| Label: | - |
| Price: |
US $65
/ pc
|
| Min. Order: | 100 pc |
| Last Online:01 Jun, 2016 |
Product Application
One type of LSHT motor, shaft distribution flow with radial force bearing .
Technical Specifications
| Part no. | Displace. ml/r | Max. cont. press. bar | Max. cont.
rpm |
Max. cont. torque
N.m |
Max. cont. power Kw | Shaft diameter
mm |
| BMR050 | 51.6 | 140 | 775 | 10.0 | 7.0 | 25 |
| BMR080 | 80,3 | 175 | 750 | 19.5 | 12.5 | 25 |
| BMR100 | 99.8 | 175 | 600 | 24.0 | 13.0 | 25 |
| BMR125 | 125.7 | 175 | 475 | 30.0 | 12.5 | 25 |
| BMR160 | 159,6 | 175 | 375 | 38.0 | 12.5 | 32 |
| BMR200 | 199,8 | 175 | 300 | 45.0 | 11,0 | 32 |
| BMR250 | 249,3 | 175 | 240 | 54.0 | 10.0 | 32 |
| BMR315 | 315,7 | 135 | 190 | 55.0 | 9.0 | 32 |
| BMR375 | 372,6 | 115 | 160 | 58.0 | 7.5 | 32 |
Main Features
BMR of BMR50,BMR80,BMR100,BMR125,BMR160,BMR200,BMR250,BMR315,BMR375 orbit hydraulic motor
1. Spool valve motor, geroler type
2. Interchangeable with Danfoss, Eaton and M+S etc.
3. Shaft: 25 MM. Thread 1/2 BSP
4. Widely applicable for machinery like forklifts, lawn mowers, lifts, loaders and excavators etc.
5. Light and compact and thus easy to install
6. Very competitive price
7. 1 year of warranty
8. Fast delivery time
Packing & Delivery
| Packaging | |
|
Packaging Details |
wooden case or according to customers special request. |
Note:
1. Intermittent means the entrance of the maximum pressure.
Continuous working pressure means the differential pressure.
2. Motor should not work under the highest pressure and the maximum speed.
3. The running time should not exceed 10% under intermittent working conditions.
4. The maximum working temperature is 80ºC
5. The maximum allowable backpressure is 10Mpa, but recommend not exceed 5Mpa, Case drain line is recommended when back pressure higher than 5 Mpa.. The motor life is benefited from a case drain line.
6. A simultaneous maximum RPM and maximum pressure NOT recommended Maximum pressure or maximum RPM operation: 10% of every minute.
7. Recommended fluids: Anti-wear type of hydraulic oil. viscosity recommended 37-73 cSt. Recommended filtration ISO18/13.
8. It is highly recommended that the motor runs below 30% of rated pressure for at least one hour before application of full load. Be sure the motor is filled with fluid prior to any load applications.
