Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

EDV-838 Electrical Cleaner

 

Thanks for your purchase of EDV-838 cleaner, in order to help familiarize yourself with the product and quality assurance, please read the instruction carefully before the usage.

 

The EDV-838 electric cleaner is the upgrade version of EDV-136 with a dry clean of all the dirt/particles etc., regular and stubborn contaminants on the fiber end face of all regular connectors as SC/FC/LC/MU/E2000 etc., PC/APC patch cord or bulkhead etc., female and male adaptors. The cleaning material inside the cleaner presses the end face under certain pressure, absorbs and takes out the dusts via an electrical sweeping way in seconds to finish the clean. It offers a high efficiency clean solution to the clients since it’s most applied in the QA clean for patch cord/module/transceiver manufacturer and complex network maintenance personnel.

Introduction

 

Components Introduction

 

 

 

 

 

A part：Adapter to hold the refill，A1 dust-free cap；A2 male cap；A3 adaptor base.

B part：Motor control,  B1 drive shaft；B2 rotation key；B3 power key

C part：C1 Batteries holder；C2 Back.

S part：Cleaning material-- sticks/refill.

 

Adaptors Introduction

 

The adaptor integrates both functions of female and male clean, it offers a more convenience to the operators for all regular cleaning with no switches. Please make sure the must use of the adaptors to hold and fix the refill and guarantee an appropriate clean position.

  

 

 

 

 

 

 

 

 

 

 

 

Adaptor Model

 

Model	Adaptor	Description
125-M/F	1.25mm Adaptor	To fix and hold EF125 cleaning sticks
250-M/F	2.5mm Adaptor	To fix and hold EF250 cleaning sticks
440-M/F	MPO Adaptor	To fix and hold EF440 cleaning sticks

 

 

Adaptor Installation

 

 

Insert the adaptor along the drive shaft of cleaner body； Screw the adaptor base to lock it fully

 

 

 

 

Cleaning sticks/refill Introduction

 

The unique cleaning material (cleaning sticks) inside the cleaner is specially processed and tested for repeated use up to 30-60times/stick and reaches an 98% cleanliness in an greater content from core to the ferrule/contact zone. Plus the material is wear/high-temperature-resistant that it has no break and drop in use. Its elasticity and thickness also help avoid the scratch when working and its porous property guarantees the absorbed capability of dusts and reuse feature without secondary pollution.

 

Cleaning sticks/refill Specification

 

Model	Quantity	Description	Clean Times
EF125 Refill（1.25mm）	500pcs/Box	To clean end face of LC/MU connectors	15000～25000
EF250 Refill（2.5mm）	500pcs/Box	To clean end face of SC/FC/ST/E2000 connectors	25000～40000
EF440 Refill（4.4mm）	100pcs/Box	To clean end face of MPO、MTP connectors	3000~4000

 

Remove the adaptor; Align the stick with slot of the shaft and insert/press inside Screw the adapter to finish the installation;

Cleaning sticks/refill Installation

 

 

Clean Material Notice

 

• No fluid is s ested in use or the performance will be seriously damaged due to a dry clean ;
• Always keep the sticks ventilated and dry;
• Keep the storage temperature of±20℃and humidity within 30%;
• Drying is recommended if the storage time is beyond 3months
• No clean effect on the scratch/dents etc., original defects;

 

Battery Installation

 

Remove the back to put the batteries inside

 

 

Operation

 

Male Clean

Take off the dust-free cap

 

 

Back and Forth

 

• Insert the cleaning stick, screw the base, take off the cap;
• Insert the ferrule into the opening of adaptor to touch the end;
• Press the power key and push the adaptor back and forth to finish the clean within 3-5s.

 

Female Clean

 

 

Back and Forth

Take off the male cap

 

• Insert the cleaning stick, screw the base，take off the dust-free and male cap;
• Insert the adaptor into the connector to touch the end;
• Press the power key and push the adaptor back and forth to finish the clean within 3-5s.

 

Operation Notice

 

• Before Clean：Make sure the cleaning material is un-wetted without shedding before use.
• Cleaning：Keep the adaptor aligned with the connector and control the distance of back and forth within 3mm and interval time around 1.5s per time to get the optimal effect.
• After Clean：Must remove the cleaner before the power is off to avoid any potential secondary pollution.
  New Feature

 

Rotation Clean

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MPO/MTP Clean

 

 

 

 

 

 

 

 

 

 

 

Lengthen Clean

 

Lengthen adaptor is designed to further the clean longer to 16cm, please refer to the specific manual for details

 

Lengthen

 

 

 

Configuration

Model	Description	Quantity
EDV-838	Cleaner Body	1pcs
EF250	To clean SC/FC/ST/E2000 etc., female/male end face	20 pcs
EF125	To clean LC/MU etc., female/male end face	20 pcs
250M/F 125M/F	To fix and hold EF125/250 cleaning sticks	1 pcs each
Case	To hold the package	1pcs
Optional Kits
EF440	To clean MPO/MTP etc., multiple cores end face	10 pcs
440 M/F	To fix and hold EF440 cleaning sticks	1 pcs
EF125L	Lengthen to clean LC/MU female/male end face	10 pcs
125L M/F	Lengthen to fix and hold EF125L cleaning sticks	1 pcs
EF250L	Lengthen to clean SC/FC/ST/E2000 female/male end face	10 pcs
250L M/F	Lengthen to fix and hold EF250L cleaning sticks	1 pcs

 

Note：Any package or color changes will subject to company policy without prior notice