Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Description：

ACWS-200B fiber coil winding station is a newly-released machine which can wind the fiber coil for FOGs in the method of CW straight or any other ways like Octupole winding, Dipole Winding and etc. 
Its fiber coil outer diameter is ≤200mm, and its fiber coating diameter is ≤0.5mm, total fiber winding length is ≤3KM.

please contact sales@oelabs.com for more information.

Features:

1. Manual operation should be necessary for installation the fiber transition spool and fiber delivery. Automatic operation is done for product spool fiber winding, automatic splitting, automatic change for fiber transition spool at both side, automatic crossing change and etc.
2. Per customer own requirement, program can be made for automatic winding, automatic splitting, automatic change and automatic crossing change at any winding method
3. Winding program can be custom-made for fiber outer diameter, product spool diameter, transition spool diameter and required tension
4. Fiber outer diameter programmable precision: 0.001mm
5. Transition Spool winding slot and product spool slot width program precision: 0.01mm
6. Splitting Axis splitting precision: 0.01mm
7. Splitting Axis Repetition Position Precision: 0.005mm
8. Incorporated into closed-loop tension controller, fiber tension is very stable while winding (variation: setting ±1.5g). Actual tension is 1/6 of setting data.
9. Total Fiber Length program precision: 100m, (variation: setting ± 0.5%).
10. Fiber from transition spool is automatic delivery while winding the fiber coil.
11. Automatic unwinding 2 methods are available, one is to first stopping while winding, then unwinding. The other is to unwinding for the whole layer.
12. Automatic fiber collecting is available while it is in unwinding.
13. Automatic zero-finding is available for main axis and splitting axis program.
14. Tension alarm for over and off the limits is available.
15. Fiber broken protection set-up is available.
16. Automatic fiber coil compensation is available.
17. Designing method: transition spool can automatically cross and change compared to the conventional QUADRUPOLAR winder which transition spool is unchangeable. It can be winding the fiber coil at any method with direct winding, Dipole Winding , Quadrupole Winding, Octupole Winding and hexadecapole winding , cross winding and cross-free winding and etc.