Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

SFP BIDI 1.25G 1310/1550nm(1550/1310nm) DDM Transceiver

PRODUCT FEATURES

• Up to 1.25Gb/s data links
• FP laser transmitter and PIN photo-detector
• Up to 3km on 9/125µm SMF
• Hot-pl able SFP footprint
• BIDI LC/UPC type pl able optical interface
• Low power dissipation
• Metal enclosure, for lower EMI
• RoHS compliant and lead-free
• Single +3.3V power supply
• Support Digital Diagnostic Monitoring interface
• Compliant with SFF-8472
• Case operating temperature

       Commercial: 0°C to +70°C

       Extended:   -10°C to +80°C

       Industrial:   -40°C to +85°C

APPLICATIONS

• Switch to Switch Interface
• Gigabit Ethernet
• Switched Backplane Applications
• Router/Server Interface
• Other Optical Links

PRODUCT DESCRIPTION

SFP BIDI-1.25G-1310/1550nm-3km-LC-DDM Small Form Factor Pl able (SFP) transceivers are compatible with the Small Form Factor Pl able Multi-Sourcing Agreement (MSA), The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the FP laser and the PIN photo-detector. The module data link up to 3KM in 9/125um single mode fiber. 

The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS (or Link)/Disable/Fault information via I2C register access.