Plastic tubing equipment
SJ-GF series of plastic pipe unit mainly used in the production of PVC, PP, PE, and other materials of all kinds of plastic pipe. Its components are parallel SJSZ-143 twin-screw extruder, nose, stereotypes cooling, the 8-bit machine traction, such as rotary cutting equipment. The series includes SJ-GF8-50 type, SJ-GF50-160 type, SJ-GF125-400 type, SJ-GF280-760 type, etc.
Technical details:
Produce the maximum diameter of 760mm
The largest production capacity 700KG / h
Traction speed 0.2-2m/min
The most traction 8000KG
Cutting the largest 760mm diameter
Contact:
Tel: 0374 - 6980112
Mobile: 13903996339
To provide all kinds of plastic tubing equipment:
First, to provide PVC, PE porous pipe communications equipment:
1, I produced PVC, PE porous pipe communications equipment: the production line is based on the needs of the development of communication channels to develop a new PVC, PE sheathing of the porous. Production lines to PVC, PE-based raw materials, through the allocation of different molding nose and stereotypes die, can produce a variety of standard types of PVC, PE sheathing of the porous, products with high compressive strength, light weight, long service life, construction The advantages of convenience, the son of the sheath and one, one can complete the laying of the need to wear second-tube. There are four products-, 5-, 6-and the various specifications of the square, can adapt to different needs. 2, my company has plastic pipe production line 12, with an annual output for the transformation of power grids, telecommunications, cable sheathing, water supply, drainage, gas delivered PE, PVC plastic pipe 18,000 tons.
Second, the provision of twin-screw extruder:
1, enhanced modified: PP, PA, ABS, POM, PPS, PET, and so on and fiberglass, carbon fiber.
2, filled with modified: PP, PE, EVA, and so on and talc, titanium dioxide and calcium carbonate, carbon black, and so on.
3, Modification: PC + ABS PA + ABS CPE + ABS PP + EPDM PP + SBS
4, filled masterbatch: apply to Masterbatch, antistatic materials mother, the mother antibacterial material, material degradation, such as the mother.
5, cable material: sheathing materials, insulation materials, radiation cross-linked materials, heat or plastic pipe material.
6, special materials: PPR of materials, PE pipe materials, such as cellulose acetate.
Supported by the corresponding screw and auxiliary equipment, all kinds of thermoplastics can be especially hard PVC powder directly into the extruder, panels, films, film and special-shaped materials can also be completed on all kinds of plastic modified And powder granulation process. Structural features: barrel and screw the "building blocks" structure, users can be based on the requirements of various combinations of materials Parallelism, with interchangeability, a wide range of adaptability, mixed plastics, performance exhaust, and machine Tube material 38 CrMoALA, nitriding, alloy hub, wear resistance, and use of cast aluminum barrel heater, water cooling.
Third, to provide PE Gas Equipment:
Use of strong highly efficient transportation system and screw with a complex nose, vacuum stereotypes, and highly efficient spray cooling, water temperature, liquid level control with two high-level of automation, user-friendly, stable and reliable continuous production, production to MDPE / HDPE Plastic gas pipe with corrosion-resistant, anti-aging, high mechanical strength, environmental stress cracking resistance, anti-creep good performance advantages, is buried in the inter-city gas pipeline preferred products.
Fourth, to provide carbon spiral pipe equipment:
PE carbon spiral bellows production line: the unit mainly used in the production of polyethylene spiral bellows, the pipe used (optical) cable jacket protection, and to gradually expand the area of application of electric power, telecommunications, postal services and highway, port and other infrastructure The use of the building, with high intensity, high toughness, corrosion resistance, deformation and convenient transportation construction, and ordinary double-wall corrugated units compared with less investment in equipment, high-strength pipe production, operation and maintenance will be.
1, targeted for polyolefin single screw extruder, a high-speed extrusion, such as high-speed characteristics.
2, for the separation of mixing screw and the head of the structure, reasonable flow, both inside and outside pipe wall smooth. 3, the production of ,50-200 mm, 0.6-1.5 m / min.
4, spiral-allocation of segregation, the mobile space, ensure that the melt has sufficient time.
5, low melting temperature of the best design, the stress on the pipe, both inside and outside smooth surface.
6, highly flexible and applicable to the co-extruded polyolefin material may be squeezed out two-story, three different specifications.
7, powerful vacuum suction device applied to the pipe out of the high-speed, three-dimensional vertical movement motor adjustment.
5, to provide PE, PVC single-walled bellows equipment:
PE, PVC single-walled bellows production line: Product Introduction: SJ-single-walled bellows extrusion machine, apply to the production of wire, cable threading pipe, washing machines suction drains, Household tube, ventilation pipe, the car clues, decorative lamps Bellows, and so on.
1, SJ50 main electrical power 11 kw, forming power 1.5 kw, vol power to 1.5 kw ,3 - 15 m / min
2, SJ65-main motor power 22 kw, forming power 4 kw, winding power 3 kw ,3 - 8 m / min
6, to provide equipment PVC Profile:
The unit is the production of PVC plastic profile of professional production equipment, production of the main doors and windows series Profile, sheets, inserts, ducts, I absorbed the company and the introduction of foreign advanced technology and the development of large doors and windows Shaped production lines, with A cone-shaped twin-screw extruder, with a high degree of automation into, smooth performance, yield, high efficiency advantages, the main technical parameters: Host Model SJSZ65/132 dual-cone traction, highly stereotyped Taiwan Center ,800-1120 mm maximum traction , 2500kg
Production rate of 0.4-4 m / min maximum traction Discharge-profile 210 mm length 5000 mm
7, to provide double-wall bellows equipment:
The unit mainly raw materials for vinyl chloride, or PVC, production of large-diameter double-wall corrugated pipe, the pipe because of their unique structure, with the quality of light, impact resistance, and high ring stiffness, corrosion-resistant, cold-resistant Heat the merits, widely used in the power cable sheathing, urban row (to) water, agricultural irrigation, and buried infiltration irrigation and construction fields from top to bottom aqueduct. , Mold and auxiliary equipment, machine nose high precision, interchangeable modules, and cooling modules and a water-cooled air-cooled two, expanding on-line can be achieved to ensure that the pipes forming the performance indicators, Central Bank cutting machine with two-pole Excellent precision cutting, electrical parts of high-controlled functions, the replacement of aircraft and related parts and components out of PVC produces double-wall bellows.
1, JS150-capacity pipe specifications Φ80 - Φ160 mm
2, JS500-capacity pipe specifications Φ150 - Φ500 mm
3, JS800-capacity pipe specifications Φ200 - Φ800 mm
4, JS1200-capacity pipe specifications Φ800 - Φ1200 mm
Contact:
Tel : 86---374---6980112
Mobile: 13903996339
E-mail: zhuwenxi816@163.com
URL: http://www.zhonghua2.diytrade.com/
Address: Changge City, Henan Province, China
