Home > Products > Industrial Supplies > Other Industrial Supplies

Brief introduction of ball mill:
Ball mill is mainly used to grind materials in mineral, cement, refractory, chemical industry, etc. Ball mill has dry and wet types. When wet ball mill works, certain water and other liquid will be added into materials to increase the flowability of materials, so the capacity is increased. When dry ball mill works, capacity is affected because material flowability is reduced, so absorbing wind device is needed on the outlet of ball mill and then negative pressure is formed in the ball mill to increase flowability of material, thus improving the capacity.
 
Type of ball mill:
Energy-saving ball mill, cone ball mill, cement ball mill, batch ball mill, rod ball mill, grid ball mill, overflow type ball mill, tube ball mill, dry-type ball mill, wet ball mill, intermittence ball mill.

Features of ball mill:
1. Large application range, simple structure and convenient maintenance;
2. Large capacity and continuous operation;
3. Barrel lining and grinding media can apply various abrasive materials;
4. Installation and adjustment are very convenient and easy to be operated. Related: dry grid ball mill wet ball mill

Working principle of ball mill:
This machine is a horizontal type cylinder rotary device and outside the cylinder there is drive gear which drives the cylinder to rotate during the working process. Materials spirally and evenly go into the first cabin of the grinding machine through the feeding hollow shaft from the feeding device, and inside the first cabin, there are ladder lining boards or ripple lining board in which there are many steel balls with different specifications. The cylinder rotates and produces eccentric force to bring the steel balls to a certain height, and then the steel balls will fall down to impact and grind the materials. After being coarsely ground in the first cabin, the materials will go through the single-layer partition board and into the secondary cabin in which there are flat lining board, and in the lining board there are steel balls to further grind the materials. Finally the powdery materials will be discharged from the discharging grating bar to complete the powder grinding process.
 
Structural features of ball mill:
The structure of our high-efficient and energy-saving ball mill is different from the traditional ball mill. The body and the bottom frame of the machine is integral, so that it can be craned and put on the base in one step. The principal axis adopts double-row centripetal spherical roller bearing. Its energy consumption is reduced by 30%, and the materials discharging mode is force by grate instead of control discharge by overflow, so that the fineness of milled materials is promoted, and the processing volume is increased by 15-30%.
 
We provide considerate services for our customers and we will send our technician to your location to install for you. We make every endeavor to satisfy our customers.