Home > Products > Computers & AV Digital > Mobile Phone & Accessories > Mobile Phone Accessories

Wireless Charger

Put down for charging

Take up for phone talking

Let your charging become easier!

Bring more convenience for better life.

The wireless charger enjoys fashion design and is portable to carry. It is compatible with all Qi standard wireless receivers. With high power transport rate, makes your charging more fast and safe.

AC adapter connection method

1. Connect the USB cable to non-connection charging pad USB slots, please ensure that put the most inside.
2. Insert the USB cable into the AC adapter, when it powers on, power LED will light up. When power on, non-connection charging pad will have voice prompt(some module without beep will light up LED instead),now you are prepared for charging.

To charge your mobile phone

1. Lay the Qi-marked charging machines in the charging area.
2. The led lighting means it starts to charge, you should put your charging machine in the charging area to get it recognized.
3. If the product does not charge, please try to replace the machine on it.

Indicator Status Description

Power on: Blue light and red light lighting at the same time, and then transferred to an idle state, lighting red

Charging: When put the phone in the charging position, the charging starts, the blue light flashes

Fully charged: Mobile phone is full, or the phone detachment, or malfunction of the charger, lighting red

Buzzer: When the charger identifications the phone’s wireless inductive receiver, the buzzer will beep once

Product List

Wireless charger, USB cable, User manual

Precautions

1. Place the phone within the charging zone, no matter what position or direction, as far as possible so that it is close to the central charging zone.
2. In the charging time, if a TV or radio sound mixed in, please put the product with the TV or radio at least 1 meter apart position.
3. Charging device if shipping outside very thick protective covers that may affect, charging is best to put protective cap.
4. Recommend using high-performance charger, charging voltage 5V and current requirements 1A or 1.5A above.
5. Please check the charging voltage is under stable environment when using the charger, the charging voltage instability may lead to the charger or handset due to excessive current and burn.
6. Large-capacity mobile devices such as tablets require high charge current, it is not suitable to use this wireless charger.
7. Keep the charger flat on the table, to avoid diagonal.
8. Please use the original data cable for charging, avoid the use of non-conforming data cable for charging; original data cable designed for charging use, inability to transfer data.

Qi Standard Supported

*With Qi logo device, as long as it is placed in the charging zone, can be continually charged.

*With Qi logo products are compatible with the Wireless Power Consortium on the wireless charger standard.

*With Qi mark of the product can charge the device.

About Qi and Qi logo are trademarks  of the Wireless Power Consortium This product is applicable to the entire Qi standard receiver.