Home > Products > Industrial Supplies > Machinery > Filters

Brush Self-Cleaning Filter

.

Feature

1. Filter precision from 50-3000μm,big filter area,high sewage carrying capacity,customized product.

2. Simple turn-of-a-handle cleaning of the filter screen,adjust the parameter of the automatic cleaning system.Automatic cleaning.

3.Has motor overload protection, which can effectively protect the motor.

4.Eliminates the need for turning off the water and extracting the filter screen for rinsing.No interruption of the process water flow during cleaning,Low pressure loss:less than 1%.

5.Easy to maintenance,installation and disassemble.

6.Flange connections to the user’s pipeline, national standard flange, versatility.

Two types of cleaning method

Automatic control: there are two types:timing control and pressure difference. Set the filtration time on the filter timer, when it reaches the setting time, the brush will start cleaning sewage,discharge time is also set by timer; while the system pressure control system with real-time user-defined pressure compared when the system pressure reaches the set pressure difference, the filter will start cleaning sewage, sewage discharge time set by the timer.The whole system returns to its initial state, prepare for the next filtration step.

Manual control: Press the manual button on the control panel, filters will start cleaning

Structure and working principle

Automatic brush away filter is composed of the drive mechanism, the control circuit (including the pressure switch), filter components, cleaning device, connecting flanges and other major component parts.It cleans sewage by the drive motor and the electric valve automatically, the operation mode is automatic operation (option:manual operation), with timing control or pressure difference control. Its automated part is controlled by reliable PLC programmable controller.

Water enters into the filter, the mechanical impurities are intercepted.When the impurities accumulate for a period,reaches 0.05MPa, then the differential pressure switch will send signal, while the PLC command is issued, transmission motor starts, the drain valve opens, the impurities deposited on the filter is brushed away,and drain out.The whole process is without personnel, without downtime. Besides, the device also has the function of timing and manual cleaning to ensure that the outlet water is safe under any circumstances.

Technical feature

Brush Self-Cleaning Filter

Specification

Flow rate：800m3/h

Design pressure：1.0Mpa

Filter screen pressure resistance max：0.2Mpa

Design temperature：120OC

Precision：50-3000μm

Washing time：10-60s（adjustable）

Wash type：timing control and pressure difference,manual

Sewage type：Scraping brush

electronic control：380V/50Hz

Blow off：Auto,Manual

   Filter screen：stainless steel  screen 

Liquid requirement：liquid suspended matter less than 60mg/L,can be 110mg/L in short time .If not ,liquid should be pre filter before inlet.