Model: | DK-60 |
---|---|
Brand: | DIKAI |
Origin: | Made In China |
Category: | Electronics & Electricity / Other Electrical & Electronic |
Label: | 60kA surge protector , lightning arrester , surge protection 60 |
Price: |
US $50
/ pc
|
Min. Order: | 10 pc |
Last Online:07 Sep, 2016 |
Product Introduction
DK-60 Modular Power Supply series SPD is designed according to IEC standards, comply with the requirements of GB18802.1-2011 Low-voltage surge protective devices——Part 1: Surge protective devices connected to low-voltage power distribution systems——Requirements and tests. It is designed as module, with features of good seal ability and 35mm din rail mounted. With working indication window, temperature control circuit breaker and built-in over current protective circuit, the modular SPD will automatically release to avoid fire danger when it breaks down. It consists of remote alarm connector for remote monitoring. It can be used for lightning protection of L-PE,N-PE(4P) or L-N-PE(3+1).
Faetures
1. Module designed, good seal ability and 35mm din rail mounted.
2. High discharge capacity.
3. No follow currents, 10/350 us wave form.
4. Consists of remote alarm connector for remote monitoring.
5. Can be used for protection lightning of L-PE,N-PE(4P) or L-N-PE(3+1).
6. With temperature control circuit breaker and built-in over currents protective circuit, the modular SPD will automatically release to avoid fire danger when it it breaks down.
Technical Parameter
Item No. | DK-380AC60 I | DK-380AC60 II | DK-220AC60 I |
SPD Type | One-port SPD | ||
Applicable Power Supply System | TT,TN,IT | ||
Maximum Continuous Operating Voltage Uc | AC 385V/275V | ||
Nominal Discharge Current (8/20µs) | 30kA | ||
Maximum Discharge Current(8/20µs) | 60kA | ||
Voltage Protection Level Up | ≤1.8kV | ||
≤1.1kV(8/20µs,5kA) | |||
Leakage Current | ≤20uA | ||
Respond Time tA | ≤25ns | ||
Indication Method | Indication Window,Turn Red When Malfunction | ||
Remote Alarm Function | Optional | ||
Maximum Connection Wire Range | BVR 35mm2 | ||
Method of Installation | 35mm Din Rail Mounted | ||
Material of Shell | PC | ||
Flame Retardant Rating of Outer Shell | UL94-V0 | ||
Protection Level of Outer Shell | IP20 | ||
Working Temperature | –25~+70℃ | ||
Relative Humidity | ≤95%RH | ||
Protection Mode | L-PE,N-PE(4P) | L-N-PE(3+1) | L-PE,N-PE(2P) |
Installation Location | Low-voltage Three Phase Power Distribution Cabinet | Low-voltage Single Phase Power Distribution Cabinet | |
Dimension(mm) | 108*90*66 | 108*90*66 | 54*90*66 |
Application Scope
1. Low voltage distribution box (board) of buildings.
2. Floor distribution box of buildings.
3. Outdoor power distribution cabinet/distribution box.
4. Any place need to be waterproof, moisture proof, dust-proof, rot proof.
5. Adapt to the power distribution system of 3+1/1+1 connection modes.