| Model: | WDW series |
|---|---|
| Brand: | HRJ |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Electronic Instrument / Laboratory Instrument |
| Label: | universal |
| Price: |
-
|
| Min. Order: | 1 pc |
| Last Online:19 Jun, 2018 |
Introduction:
tensile, compression, bending, torsion, shearing testing and researching with variety of metal, nonmetal material and composite material under room temperature.
testing and providing data according standards of GB, ISO, JIS, ASTM, DIN, BS and other international standard.
sample of thin plate, panel, belt, foil, flat bar, wire, bar, proximate matter, pipe, sheet, square, round, rectangle, and annulus shaped, cast iron, nonmetal alloy of cast iron, pipe section, proportional and nonproportional, fully wall thickness of longitudinal and horizontal peeling strip, rectangle and round section.
tensile, compression and bending test with varety of material by adding gripper.
tensile, compression and bending test with variety of rubber, plastic, film and other nonmetal material
test with variety of metal, thin metal, wire, fine wire, fiber, elastomer, foam.
test with textile, food, medcine, cosmetic, biological material.
tensile, peeling and welding strength test with electronic component.
test with wooden, paper, film production and other nonmetal material.
strain relaxation and adhesive strength test.
Important specification
|
WDW-1kN/2kN/5kN/10kN/20kN/50kN/100kN Electronic Universal Testing Machine (Standard type)(CE) |
|||||
|
1 |
Max. test force |
5kN/10kN/20kN |
30kN/50kN |
100kN |
|
|
2 |
grade of machine |
Gradeof 0.5/ 1 |
|||
|
3 |
measure range of loading |
0.4%~100%FS (grade of 0.5) /1%~100%FS (grade of 1) |
|||
|
4 |
relative error of indicating value |
Between ±0.5%(grade 0.5) /±1.0% (grade 1) |
|||
|
5 |
resolution of force |
1/±300000FS (resolution of fully stroke is not changed) |
|||
|
6 |
measure range of deformation |
0.2%~100% |
|||
|
7 |
adjusting range of speed for force controlled |
0.005%~5%FS/S |
|||
|
8 |
Control precision of speed for force |
When speed is <0.05%FS, between ±1% of setting value When speed is ≥0.05%FS, between ±0.5% of setting value |
|||
|
9 |
adjusting range of speed for deformation |
0.005~5%FS/s |
|||
|
10 |
precision of speed for deformation |
When speed is <0.05%FS/s, between ±1% of setting value When speed is ≥0.05%FS/s, between ±0.5% of setting value |
|||
|
11 |
adjustable range of speed for displacement |
0.001~600mm/min (customized high speed of system 0.001~2000mm/min) |
|||
|
12 |
control precision of speed for displace |
Between ±0.2% of setting value |
|||
|
13 |
constant force, deformation, displacement control range |
0.5%~100%FS |
|||
|
14 |
control precision of constant force, deformation, displacement |
When speed is ≥10%FS, between ±0.5% of setting value, When speed is <10%FS，between ±1% of setting value. |
|||
|
15 |
effective test span |
400mm |
400mm |
500mm |
|
|
16 |
moving stroke of transom |
1000mm |
1000mm |
1200mm |
|
|
17 |
voltage |
~220V±10% 50Hz (reliable landing) |
|||
|
18 |
Rate of machine |
400W |
750W |
2000W |
|
|
19 |
size of loading frame(LWH) |
860x460x1750mm |
940x520x1850mm |
1050x560x2150mm |
|
|
20 |
weight |
≈300kg |
≈500kg |
≈800kg |
|
