Home > Products > Industrial Supplies > Machinery > Engraving & Etching Machine

Cement rotary kiln are commonly used for heat processing of minerals and aggregates such as lime, cement, and iron ore. To achieve consistent quality results, it is important to maintain a uniform product temperature at the kiln entry, mid zone, and discharge. In most rotary kilns, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently, when selecting a sensor, the design, wavelength, and alignment are all important considerations.

Our high-performance dual-wavelength sensors offer unequalled performance for accurate and repeatable measurements on cement kiln applications. These sensors can operate properly when the target energy signal is diluted over 99% by such things as dust and smoke. To effectively measure targets through flames, the 1400 and 4400 Series are recommended. These single-wavelength sensors utilize a very narrow band 3.8 micron filter that provides unequalled performance with measurements through flames.

Our advantages:

1. Cement rotary kiln adopts adjustable speed driving with high efficient and low power consumption.

2. The fuel consumption of unit product is low and large capacity.

3. Stable mechanical performance and transmission, accurate speed control and easy control the calcination temperature.

Structure of our products:

1. Support device: advanced shaft structure, automatic temperature measuring device and electrical heating device.

2. Catch wheel: including mechanical wheel and hydraulic pressure catch wheel.

3. Gears: single or double. The rotating speed is controlled by regulating motor, DC motor or variable frequency and speed regulation motor. Be reliable, energy-saving and efficient.

4. Cylinder tyre bolster: lower bolster has three types: fixed, zoom and floating. Its structure is simple, replacement is convenient and it won’t hurt cylinder when it needs a change.

5. Sealing equipment: there are many kinds for choice according to kiln models, including air cylinder edge sealing, spring edge sealing, graphite block sealing and combination for above. The feature is adaptive for cylinder rotating and swing. And sealing effect is very good.

6. Kiln head hood: including stationary type and flexible type.

http://www.zkeqpt.com
Phone: 86-371-55902866 
Fax: 86-371-55902858
Contact:Nancy Wang
email:ec18@zkcorp.com