| Model: | - |
|---|---|
| Brand: | ktmt |
| Origin: | Made In China |
| Category: | Industrial Supplies / Machinery / Filters |
| Label: | high flow filter , large flow filter , pleated filter |
| Price: |
US $100
/ pc
|
| Min. Order: | 5 pc |
| Last Online:17 May, 2017 |
Introduction:
The Hi-Flow Filter cartridge is a new product of water filter cartridge. It has a 6 inch/152mm large diameter, and is coreless, single open-ended with an inside to outside flow pattern. The large diameter with big filter area can reduce the number of filter cartridges and the dimension of housing required. The end cap and the filter layer are made of hot soldering, there is no adhesive, so there is a wide range of chemical compatibility, can be applied in many fields. Besides, the long service life and high flow rate result in low investment and less manpower cost in many applications.
Specification:
|
Outside Diameter: |
6 inch(152mm) |
|
Length: |
20 inch(508mm),40 inch(1016mm),60 inch(1524mm) |
|
Filter media: |
Pleated glass fiber
|
|
Support/Drainage: |
Polypropylene (PP) |
|
End caps : |
Glass fiber reinforced Polypropylene |
|
Seal Material : |
EPDM, NBR |
|
Removal Rating: |
1 µm , 4.5 µm , 6 µm , 10 µm ,20 µm ,40 µm ,70 µm,100µm |
|
Maximum Operating Temperature: |
Pleated glass fiber:121°C Pleated PP: 82°C Melt Blown PP: 65°C |
|
Maximum Differential Pressure: |
Pleated glass fiber:3.4 4Bar at 121°C Pleated PP: 3.44Bar at 82°C Melt Blown:1.03Bar at 65°C |
|
Recommended Change out Differential Pressure: |
2.5Bar at 20°C |
|
S ested maximum Flow of water: |
20 inch length: 660LPM 40 inch length: 1,300LPM 60 inch length: 1,900LPM |
Application:
Features:
-- Gradient pore structure
-- The maximum size of the filter system can be reduced by 50%
-- Up to 110M3/H flow rate per filter cartridge for water filtration.
-- Maximum 50% reduction of filter system
-- 20 inch /528mm,40inch/1022mm and 60 inch/1538mm lengths are available
-- All contaminants can be removed within the cartridge due to the flow direction.
