| Model: | FM10S-AN |
|---|---|
| Brand: | FAMA |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / Emergency Light & Indicator Light |
| Label: | traffic controller , traffic , traffic light |
| Price: |
US $100
/ pc
|
| Min. Order: | 10 pc |
| Last Online:18 Oct, 2016 |
Details
Packaging & Delivery
| Packaging Details: | Standard carton for export |
|---|---|
| Delivery Detail: | Shipped in 15 days after payment |
Product Functions and Technical Features:
1.Working voltage range: 10V-30V DC.
2.Low power consumption (master controller/salve controller:
3.less than 1W under 12V dc while 1.5W under 24V dc)
4.Adopt 1pc master controller with 8pcs salve controller maximum.
5.Each master controller/salve controller has 11 outputs channels maximum (4 control phases)
6.Over-voltage protection for master controller/slave controller,, the power supply will shut down when input is over 36V.
7.CPU control and driving output adopt modular design, easy maintenance and repair; CPU adopts MCU chips from US, with build-in watch-dog circuit to assure its stability.
8.Driving output adopts MOSFET(40mΩ low internal resistance MOS type), low consumption, separate fuse on each phase.
9.Wireless communication adopts ISM frequency band, no need for permission.
10.Wireless data transmission adopts GFSK modulation mode.
11.Wireless communication has 8 channels for option, to avoid same frequency interference among controllers.
12.The communication distance can reach 600m between master controller and slave controllers, junctions less than 600mcan be controlled by one master controller.
13.The master controller adopts same frequency interference measuring ability, it can monitor if the same frequency interference signal exists or not.
14.The master controller has password-setting function, to avoid any illegal modification.
15.The controller can set up 255 IDs maximum, to make sure no interference occurs among various controllers in the same information channel.
16.The master controller and slave controller have auto-degrading function while in serial communication failure, and auto-recovery function when the communication is on while in degrading state.
17.Adopt wireless remoter controller for setting and operation.
18.With the remoter , monitoring the communication status among controllers and battery voltage status of the master controller and slave controller.
19.The remote controller carry out Tekin functions like yellow flashing, all red, manual and specified phase green light.
20.32 working menus available(number 1-30 can be set freely), apply them at any interval.
21.Set the working mode of yellow flashing or power off during night.
22.16 working plans maximum can be set each day, multiple weekday plans and weekend plans.
Technical parameter:
|
Item |
Technical Parameter |
|
|
Working Voltage |
DC12/24V(Compliant Automatically) |
|
|
No-load Power of Hosts and Auxiliary |
<1W(@DC12)& <1.5W(@DC24) |
|
|
Over-current Protect Value |
35V±2V |
|
|
Communication Mode of Hosts and Auxiliary |
Wireless or RS485 Cable |
|
|
Wireless Communication Modulation Style |
GFSK |
|
|
Wireless Communication Frequency |
490MHZ |
|
|
Wireless Communication Baud Rate |
9600bps |
|
|
Wireless Transmit Power |
<=100mw |
|
|
Wireless Communication Distance |
>600m |
|
|
Time and Sequence of Motor Light Runs |
All Red (can be set)→Green→Green Flashing(can be set)→Yellow→Red |
|
|
Time and Sequence of Pedestrian Light Runs |
All Red (can be set)→Green→Green Flashing(can be set)→Red |
|
|
Rated Drive Current for Each Output |
5A |
|
|
Resistance to Surge Current for Each Output |
≥100A |
|
|
The Largest Independent Output Channel of Hosts or Auxiliary |
11 |
|
|
The Largest Independent Output Phase of Hosts or Auxiliary |
4 |
|
|
Collocation way (one unit) |
Hosts Quantity |
1pcs |
|
Auxiliary Quantity(Collocated by Crossing) |
0~8pcs |
|
|
The Menu can be Adjustable |
32 |
|
|
Menu can be set by user(Operational Phase Timing Plan) |
30 |
|
|
The Steps can be set per Menu |
16 |
|
|
The Maximum Duration can be set every day |
16 |
|
|
The timing setting range for single step |
1~25S |
|
|
The setting range for all red settling time |
0~5S |
|
|
The setting range for yellow settling time |
1~9S |
|
|
The setting range for green flashing |
0~9S |
|
|
Working Temperature |
-20℃~+80℃ |
|
|
Working Condition Relative Humidity |
<95% |
|
|
Save option scheme(when power off) |
10 years |
|
|
Time Error |
Year error <2.5minutes(in the condition of 25±1℃) |
|
|
Box Size |
300*280*80mm |
|
