Home > Products > Industrial Supplies > Machinery > Welding Machinery

HOT! 2013 newest automatic outdoor advertising banner welding machine

Mingyang gorgeous banner welder can be applied in advertising industry for the welding of PVC, PE hot-melt plastic membranes, such as : spraying cloth, lightbox fabric, coated fabric, mesh cloth, membrance structure, and heat shrinkable tent, waterproof membrance, geomembrance, and inflatable toys in building industry, chemical industry, medical industry, etc.

Features of the welding spout:

1. CPU PID control temperature, LCD panel numerical display, SMT process, performance is stable and reliable.

2. Mabuchi Motor imported from Japan wanbao, high efficiency and long service life.

3. Import nickel cadmium alloy heater, overheating protection device, warming rapidly, full function and long life.

4. Double eddy current diffuser, air downy, no damage to the device.

5. Sensor closed loop circuit, microcomputer zero trigger temperature control, temperature with accurate control and stability.

6. Pressing button to control temperature, can adjust from 100 to the highest 590 degree, 10 degree adjustment in each step, temperature in large range can be infinite adjusted.

7. 3 gears air flow by electronic circuit control. First gear 160 L/Min, second 330 L/Min, third 500 L/Min.

8. Delay shutdown 20 seconds, prolong the life of heater.

Operation:

1. First of all, tighten up the spraying cloth, target the overlap seam(2-5cm), and fix the cloth on the ground with glue or tape;

2. Switch on the power, turn the handle to the left, till the spout is aligned with the wheel. Then turn the black button to the right, adjust the speed; after the adjustment, turn the handle to the right till the spout leave the ground and begins to walk;

3. Adjust the temperature, turn on the “fan switch”, then press the “ temper adjust”, according to the thickness and temperature tolerance of the cloth, or u can also put some material in front of the spout, if the material melts immediately but is not burnt, it is the proper temperature;

4. after the temperature and speed is adjusted, put the edge of the right-wheel in a level with the edge of the seam. When the actual temperature reaches the set temperature, turn the handle to the left till the spout inserts into the seam totally. The machine begins to walk and splicing begins;

5. During the splicing, if the spliced material is burnt; first you should turn up the speed or you can turn down the temperature(any one of the two methods) in this way it can avoid burning the cloth, but please do not sharply increase the speed, or the machine will run off the way, in that case, it may cause panic; as a result. The welding will fail and damage the material;

6. Before using, please find a proper temperature and speed; if slow, it will damage the cloth; if fast, it will cause poor bonding; so it is important to match the proper temperature and speed;

7. On the completion of splicing, turn the handle to the right, till the spout leave the material totally, and turn off the temperature; but it is not allowed to take off the plug and turn off the power supply; the plug and the master switch can only bedetched until the air heater stops automatically;

8. Don’t use the machine in wet weather; the working place must be dry and flat; pay attention to the fire protection, it is not allowed to operate the machine by the people other than the specified professional person; Dismantlement of the machine without authorization will cause responsibilities by themselves;

9. The warranty period is six months from the purchasing date, heating elements, as wear parts, are not in the warranty scope;

10. When you switch off the heater, the cooling fan will continue working for one more minute automatically for cooling before it stops automatically, please do not restart the heater or even detach the plug and switch off the general supply out of your mistaken judgment that the power hasn’t been cut off.

Custom Field:

 1. No need glue;                                                                                                                                2. Temperature is adjustable                                                                                                            3. Speed and temperature can be arbitrarily set                                                                                      4. Easy to operate                                                                                                                              5. Without space constraints                                                                                                              6. Weld banner; sticky side, wrapped in rope, splicing can be do in one machine

Packaging details :

demension: 46*33*34cm 
weight:12kg 
packing: carton

Delivery Detail:

Shipped in 3 working days after payment