Home > Products > Industrial Supplies > Machinery > Heat Exchange & Air Conditioners

Basic Introduction 

PRE-CHARGED PRESSURE TANKS.

Diaphragm tanks are pressurized water vessels where the water and air are separated by a flexible diaphragm allowing the water to expand and absorb pressure surges.

In booster applications, diaphragm tanks can be used on both the discharge and the suction manifold. Connected to the suction manifold, a tank serves to counteract fluctuating inlet pressures.
 
Pressure in low flow periods
Diaphragm tanks are commonly used on the discharge manifold to provide water storage for the system in very low flow situations. It decreases the running time of the booster pumps, thereby making the system more energy effective.
 
Eliminates water hammer
Since the diaphragm is flexible, it is able to adjust to sudden pressure changes, thus counteracting water hammering.
 
When to use diaphragm tanks…
If low or no-flow conditions are expected, a diaphragm tank should be used to work in conjunction with the Stop Function of the booster system.
 
In areas where inlet pressure fluctuates, diaphragm tanks are often installed on the suction manifold to reduce damaging peak pressures

APPLICATIONS

For maintaining the water pressure in a residential water pump system when the pump is not running.

FEATURES & BENEFITS

• ANSI/NSF Standard 61 approved - assures safe, clean drinking water
• Blended butyl rubber diaphragm system - isolates the air charge from the water chamber and provides long tank life
• Heavy-duty steel construction - 16 gauge cold rolled steel with appliance-quality paint
• Steel clench ring protects diaphragm from rubbing against tank wall - eliminates abrasion and reduces condensation
• Brass air valve with O-ring seal - allows adjustment of air pre-charge
• Single diaphragm design 100% potable quality butyl.        
• Patented 316 stainless steel connection.        
• Virgin polypropylene liner, so no water touches plain steel.    
• Internal clench ring becomes more secure at higher pressures.      
• High quality two part polyurethane, epoxy primed paint finish    
• Brass stemmed air valve and O–ring sealed valve cap.
• NSF standard 61, CE / PED, WRAS approvals.    
• Maximum temperature up to 90 °C.  
• Standard maximum pressure 150 PSI / 10 Bar.Aqualeader ,we have appied 240 psi/16 bar
• 5 Year Warranty  

Technical Parameter