| Model: | APPA-01 |
|---|---|
| Brand: | Amuse |
| Origin: | Made In China |
| Category: | Construction & Decoration / Other Construction Materials |
| Label: | PolycarbonateProfile , PC Connecter , PC Accessories |
| Price: |
US $4.9
/ kgs
|
| Min. Order: | 3000 kgs |
| Last Online:30 Apr, 2017 |
Welcome to contact us Amuse Plastic for more items and details!
Wholesell H U Snap Style Polycarbonate Plastic PC Connection Accessory
Product Features:
1. Lightness
2. Graceful appearance
3. The same with PC sheet on physical property
4. Good seal ability
5. Easy installation
6. Temperature resitance range: -40 to 120°c.
7. Weather proof
8. Flame resistance: B1 grade
9. Environment friendly
Polycarbonate Characteristics:
| No. | Characteristics | Unit | Data |
| 1 | Impact Strength | J/m | 850 |
| 2 | Light Transmission | % | 85 |
| 3 | Specific Gravity | g/cm3 | 1.2 |
| 4 | Coefficient of Thermal | mm/m °c | 0.065 |
| 5 | Service Temperature | °c | -40 to +120 |
| 6 | Heat Conductivity | W/m2°c | 2.3-3.9 |
| 7 | Tensile Strength | N/mm2 | >60 |
| 8 | Flexural Strength | N/mm2 | 100 |
| 9 | Modulus of Elasticity | MPa | 2400 |
| 10 | Tensile Stress at Break | MPa | >65 |
| 11 | Elongation at Break | % | 100 |
| 12 | Specific Heat | kj/Kgk | 1.17 |
| 13 | Heat Deflection Temperature | °c | 140 |
| 14 | Effect of Soundproof | dB | 3-4 |
PC Profile Details:
Suitable thickness
PC-U: 4mm/6mm, 8mm/10mm
PC-H: 4mm/6mm, 8mm/10mm
PC-UP & DOWN SNAP CONNECTER: 4mm-10mm
Advantage
Same material as the sheets, making the construction look more beautiful & harmony.
Application
To connect polycarbonate sheets together and prevent dust inside the sheets.
Professional PC Accessories: PC "H" connecter, PC "U" edge, PC snap (PC cap), ....
Loading:
PC Sheets Storage:
Stored on flat surfaces or wooden bearers with 100mm minimum bearing surface, placed at centre not exceeding 1m.
Make sure the place where you stored is dry, shaded and well ventilated area.
Use an opaque cover (not under flexible PVC coverings), tightly secured, protecting from wind, rain and sun.
Don't store under direct sunlight or without shelter from rain. Indoors torage is always preferable.
PC Sheets Installation:
Step 1: Use screws to attach the base connecting profiles to the roof beams. Make sure the screws not bend, tear or exert excessive pressure on the profile.
Step 2: Place the sheet on top of the base profile support edges, with the side covered by the printed protective film facing upwards.
Step 3: Slide the base under the sheet and attach it to the beam.
Step 4: Place the side spacer profile onto the roof beam and attach the cap to the base by hammering into place with a rubber mallet.
Kindly Remark:
1. As expandable, the drilling diameter must be 1.5 times than that of the bolt.
2. Do not use gaskets made of PVC.
3. PC Sheets can't be installed too tight because there will be thermal expansion and contraction which will adversely affect the installation.
| Payment Terms: | TT/LC/WEST UNION/CASH |
|---|---|
