Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

2.4G RF IP65 RGBW RGB LED floodlight compatible with wifi 

1)Soft starting mode design, the lighting will get brighter and brighter when power on, 100% full brightness within 2 seconds.

2)RGB+W/WW or WW/CW lighting color, with 640,000 different colors and 9 dynamic color changing modes;

3)Remote controlled by 2.4GHZ wireless LED controller, max controlling distance can reach 30 meter, strong anti-interference capacity or smart controlled by iOS/Android Apps from your mobile phone, manage the lighting status of flood light anytime and anywhere.

4)Memory function, the lighting resumes the previous lighting status after power on again.

5)Bridgelux RGBW COB LED with built-in Mean-Well LED Driver, ensuare long and stable work status.

6)High density die-cast aluminum housing, anti-corrosion & anti-oxidation, fast heat dissipation feature.

7)IP65 Waterproof, can be widely used as landscape lighting outdoor for building, villa, bridge, gardens, hotels, museum, etc

2.4G RF RGBW Remote Controller 

It is a high-performance RGB led touch remote bulb, adopting the most advanced PWM control technology,owning 640 thousand colors and 20 automatical changing modes to choose.

With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.

Bulb and wireless remote controller and APP installation

1. Battery installation
Please take the remote controller and carefully press the battery cover and push it away in a downward motion. Install two AAA batteries into the remote controller. Exactly match the negative pole of the each battery into the largest spring. Do not touch the color ring when you install the batteries. 

2.App installation
Download and finish the installation of the IOS and Android APP as per wifi controller.

3.led bulb installation 
Talk the led bulb out of packing, hold it by the acrylic lens.
Switch off the power at the wall or lamp switch before installation.
Replace the original light bulb with the new wireless led bulb.
Switch on the power, the led bulb will light under normal circumstances.
Sync the remote or you APP to the bulb as per linking new lights to the remote controls and set to full brightness, change color or white.
If the bulb does not sync, then firstly clear the first channel as per unlinking the lights.

9 programs

Program 1:night light function.
Program 2: Red/Green/Blue cycle changing 
Program 3:dimmable cool light mixed by RGB
Program 4:Red wave effect.Red lighting is dim up and down.Speed can be adjust.
Program 5:Green wave effect. Green lighting is dim up and down.Speed can be adjust.
Program 6:Blue wave effect. Blue lighting is dim up and down.Speed can be adjust.
Program 7:Yellow wave effect. Yellow lighting is dim up and down.Speed can be adjust.
Program 8:Orange wave effect. Red lighting is dim up and down.Speed can be adjust.
Program 9:Pink wave effect. Pink lighting is dim up and down.Speed can be adjust.