Home > Products > Metallurgy , Mining & Energy > Metallurgy & Mining > Flat & Rolled Metallic Materials

Working ability

(Maximum working specification)

Flat steel

≤10mmx50mm

Round steel

≤diameters 16mm

Square steel

≤16mmx16mm

Basic shaft rotation speed

10 r/min

Electric motor performance

Power: 2.2KW

Electric voltage: 380V

Frequency: 50HZ

Main features

1.There is no need to beat flat the materials to process, after heat of the end of material we can get the fishtail decoration directly by this machine. The material end becomes wider and thinner with the thickness not more than 2mm.

2. Made with cycloidal pinwheel reduction box the machine has large torque. Special way is adopted for the torque transmission between the gear box and working case, ensuring smooth and reliable mechanical operation.

3.The material input has the following advantages:  adjustable, flat and straight, so the fishtail are very straight.

4. there is a size-localization device. We can select the rolling length through the localization size according to your requirement and to achieve the best result.

5.When we process 10mm or more materials, we can get the beautiful moulding fishtail pattern depend on the wide rolling mechanism.

6.large processing range and high efficiency, and can roll 300 pieces of 8×40mm flat iron parts per hour.

The roller material has very good quality and long-life, and each roller can roll at least 100 thousand pieces.

External dimension

1165mmx560mmx1100mm(LxHxW)

Packing by one wood case, the sizes is 1200x580x1120mm

Net weight (kg): 350                                           gross weight(kg):400