Model: | ISO |
---|---|
Brand: | AEM |
Origin: | Made In China |
Category: | Transportation / Car Accessories / Auto Maintenance |
Label: | fuel injector , standard tester , test bench tester |
Price: |
US $35
/ pc
|
Min. Order: | 6 pc |
Last Online:13 Jul, 2017 |
Specification\Type |
Low-inertia Standard Injector |
Pintle Standard Injector |
Orfice Standard Injector |
Model |
ISO7440B64-20.7,
|
ISO7440A14-17.2,
|
ISO7440A54-17.2,
|
Photo |
|
|
|
Opening Pressure |
20.7+0.3Mpa,
|
17.2+0.3Mpa |
17.2+0.3Mpa,
|
Orifice Diameter |
Ф0.4, Ф0.5, Ф0.6, Ф0.7, 0.8 |
No |
Ф0.4, Ф0.5, Ф0.6, Ф0.7,Ф0.8 |
Installation Length |
55mm |
||
Outer Dimension |
218×115×48mm |
193×140×40mm |
231×144×40mm |
Suitable Pump |
PW,PB,PN,PW2000,P7100,BQ,etc |
I,II,B,A,etc |
A,AW,AD,I,etc |
Notes |
1.Check and adjust opening pressure regularly; 2.If fuel delivery quantity changes dramatically、in most cases caused by the orifice blocked by scrap iron ; 3. If injectors are assembled after being cleaned or purged ,the specific composition of nozzle, orifice,and injection line can not be changed casually. |