Home > Products > Electronics & Electricity > Electronic Instrument > Electronic Measurment Apparatus

 Preface

ZBL-R800 Multifunctional Rebar Detector is a portable   integrative and multifunctional one combines the functions of both scanner for rebar test and detector for rebar rust test.

 Functions

Identify rebar location   direction and distribution.

Double function of rebar and rust test

Test the thickness of concrete cover.

Test rebar diameter.

Qualify the thickness of concrete cover automatically.

Test data storage   check and transmission.

Single-electrode testing of concrete rebar corrosion.

Double-electrode testing of concrete rebar corrosion.

Divide rebar corrosion in maximal 10 gray shades or color graphs. 

Analyze professionally with Test Data Processing Software.

Technology Data Sheet

Packaging List

Safety Instructions

For a better usage   please read operation manual carefully before using the instrument. 

• Requirements for working environment:   

• Environmental temperature: 0℃～40℃；   
• Relative humidity :< 90%RH;   
• Long time sunlight perpendicular incidence is avoided.   
• Anti-corrosion: when used under damp   dusty and full of corrosive gas conditions   protective measures are necessary.

• Requirements for storage environment:

• Environmental temperature:-20℃～+60℃.   
• Relative humidity: < 90%RH;   
• Out of use   please place instrument into package   store in a ventilated   cool and dry place   Long time sunlight perpendicular incidence is avoided.   
• If long time out of use   please charge and start up for a check regularly.

• Avoid water.
• Avoid usage under strong magnetic field   such as the nearby of large electromagnet or transformer.
• Shock-proof: During the process of usage or handling   avoid severe vibration or shock.

Maintenance

• Power supply

Instrument charges with inside specific chargeable lithium battery   after full charge   it can work last for nearly 26 hours. When used   please pay attention to left of electricity. If lack of electricity   close instrument quickly and charge in time. Or it can lead to lose of testing data as a result of sudden blackout even damage to instrument. Avoid using other batteries or power supplies.

• Charge

When charged   plug the power supply into AC220±10%V socket and plug charger into the instrument’s power supply .when the charge indicator is red   it is charging to the inside battery. When turning to yellow   it is completed. At that time   unplug the charger in time lest overcharge affects the battery service life.

Attention: To guarantee full charge   please charge 6-8 hours consecutively   at the same time   avoid charge under the environment of over 60℃.

Long time out of use   charged battery will discharge and lead to decrease of electricity. Recharge before usage. While charged   a common phenomenon is instrument and charger will be heated in some extent. Good ventilation is necessary for heat dissipation.

Attention: Avoid charge with other power adapters   or it will cause damage to instrument.

• Rechargeable battery

When battery is near the end of service life after frequent charges and discharges   if the battery works abnormally (cannot charge with electricity   cannot charge full or short time is used after full charge)   it is probable that rechargeable battery has been damaged or reaches its end. At that time   please contact with our company   change a new one. Avoid short circuit of battery or approaching high source temperature.

• Every time when used   proper cleaning for host and sensors etc is necessary against water or dirty into plug in or instrument   or it will lead to low performance even damage of instrument.

Attention: Avoid placing instrument and fittings in water or cleaning with wet cloth.

Avoid scrubbing instrument and fittings with organic solvent.

Please wipe host and socket with clean and soft dry cloth

Responsibilities

The instrument is sophisticated testing equipment. When user has one of the following actions or the other man-made destruction   the company does not undertake related responsibilities:

• Violate the above requirements for working and storage environment; 
• Improper operation;
• Open case arbitrarily or dissemble any components without permission;
• Man-made or accident-caused severe damage to instrument.