Home > Products > Industrial Supplies > Plate Making & Printing Machine

SLA process is the most studied,the most advanced and the most widely used method of rapid prototyping in the world (also the rapid prototyping method adopted by our company).SLA technology is the principle of conputer-controlled laser beam scanning on the surface of the photosensitive resin material point by point.The thin resin layer (about a few tenths of a millimeter) in the scanned area produces photopolymerization reaction,which solidifies to form a thin layer of the part.The table down a layer of thickness so that the surface of solidified resin is coated with a new layer of liquid resin.The next layer is scanned and repeated until the whole prototype is finished.Since the photopolymerization is based on light rather than heat,only lower power of laser source are needed at work.

Print precision

can be as fine as 0.1mm,can process any complicated and delicate parts,or the prototypes and moulds which are difficult to be shaped by traditional methods

about 0.2mm,and it is difficult to manufacture complicated parts

Print size

Kings®3D printer maximum print size: 850 * 850 * 550,large-scale molds also do rapid prototyping

generally about 300*300*500,difficult to build large size complicated parts

Print speed

Kings®3D printer can reach 10m/s,processing speed is high,which shorten production cycle

the fastest printing speed is only 0.15m/s,prototyping speed is relatively slow,long production time

Printed materials

Multi-attribute photosensitive resin is available

Only supports ABS and PLA

Surface finish

smooth surface,thin wall structure can produce very fine details,post-processing is easy

feel layered by touching finished products

Advantages:the laser power increases automatically when the internal structure is filled,the spot diameter becomes larger,and the printing speed increases.When printing an external profile,the laser power is automatically adjusted to decrease,the spot diameter becomes smaller,and the printing speed is normal.The overall printing speed increases,the surface fineness is better

Kings control software

You can monitor the printing progress,print time and print speed through the screen.

Materials

Jinshi research and development of 3D printing materials in the international advanced level,including hard material,soft material,color material with high temperature resistance,high toughness,high strength,flexibility,transparency and other characteristics,to meet the different industries on the physical properties of 3D printing produtcs,so as to achieve the perfect final product presentation.

Tensile strength

(Mpa)

Tensile modulus

(Mpa)

Elongation break

(%)

Flexural strength

(Mpa)

Flexural modulus

(Mpa)

Izod impactnotched

(J/M)

Heat deflection temperature

(℃)

27-31

2189-2395

12-20

69-74

2692-2775

58-70

50-60

45-50

2500-3720

4-9

70-80

2400-2600

20-27

80-90

40-58

11-16

71-76

2495-2565

30-40

60-70

50-58

15-25

60-70

2700-2950

25-35

85-95

Print accuracy

High precision,the size error of the product structure is ±0.1mm.

Apperance

Smooth surface,delicate,structured.

Post-processing

1. Remove the support structure
2. Industrial alcohol cleaning
3. Fine polished support structure parts

Application area

Kings 3D series equipment not only is the first choice of rapid prototyping of car,building,light fixture,toys,mobile phone,medical,fashion,art and industry,but also a wise choice for shoe mold and other complex process of mold industries.

Requirements of installation environment

1.Print workshop should be protected from light,using soft yellow light.

2.Workshop is clean and no dust.

3.The temperature (20-25°) standard is 23°,air humidity 35% -40%,keep ventilated.

4.The printer should far away from vibration source.

5.Voltage is 220V,air conditioning socket must use 16A,printer and oven must use 10A, must be ground wire.

6.Air conditioning requirements:10m2 output power 5000W,20m2 output power 7500 W,30m2 output power >7500W

7.The heat dissipation sheet metal hole remains unobstructed,exhaust fan cover must be covered.

8.The waste water of the dehumidifier must be drained outside the printing workshop,air conditioning and dehumidifier can not be facing the printer.

9.The washing alcohol is placed in the washing room and can not be in the same room as the printing workshop.

10.Photosensitive resin material should be used frequently.

Certification

After-sale service and service instruction

1.1After-sales: We arrange our technical staff in 30 working days to provide global technical after-sales service.
1.2Services: Customers buy our equipment,we provide professional skills and are responsible for home installation and deb ing,your company can send the relevant personnel to our company to train professional knowledge of equipment operation.
1.3Warranty: Equipment warranty 2 years.

Shenzhen Jinshi 3D Printing Technology Co.,Ltd. is a high-tech enterprise.We devote ourselves to providing professional solutions of rapid manufacturing for customers in various industries based on the 3D digital manufacturing technology through integrating professional resources worldwide in the field of rapid manufacturing.The services include the equipment in the area of rapid prototyping RP,rapid tool RT and reverse engineering RE,various professional rapid processing software,rapid manufacturing integration system,the research and development of rapid prototyping material photosensitive resin,the design and production of various types of rapid prototyping model.

About payment

1.Shipping terms

FOB/EXW: 50% deposit inadvance,the balance should be paid before shipment.

2.Payment terms: T / T;Onetouch;international Alipay

3D printer

1

laser

1

scraper

1

Under the platform

1

UPS power supply

1

tool case

1

allen wrench

1

gloves

1

caliper

1

brush

2

thermometer

1

clip

2

UV curing tank

Optional

dehumidifier

Optional

Package

Delivery method: by sea or by air

Delivey time: 30-45 days

1.Q : Are you a factory or a trading company?
A : We are a factory.

2.Q : What is your max size for CNC prototype and 3D printing?

A : For CNC machine,there is no max size but bigger
3D printing max size : 850mm*850mm*600mm.

3.Q : Can you do OEM customization?

A : Yes,we provide OEM services.

4.Q : How long will be your delivery time?
A : It’s usual30-45days.Sometimes,it can be discussed and make an agreement between us.

5.Q : What information should I give for detailed quotation?
A : If you have drawings or samples,please feel free to send us,and tell us your special requirements such as material,processing technology and the amount etc.

6.Q : Do you only provide rapid prototyping service?
A : No,we can not only make prototype but also open molds,that means your order quantities can change from 1pc to a large quantity.

7.Q : How does your facility handle quality control?
A : quality is the most important
(1) all the raw materials we use are environmentally friendly;
(2) skilled workers care about every detail in the production and packaging process;
(3) quality control department is responsible for quality inspection.