Specification and model of fiber optic fiber box
Fiber optic fiber box (detailed description) product overview:
The optical fiber splitter box is installed on the outdoor wall, pole and other places, which can be used to connect and distribute the optical fiber cable conveniently, and the optical splitter can be placed to realize the function of splitting light.
Optical cable distribution box is the wiring and dividing equipment of user terminal in FTTH system, which can realize the functions of welding, distribution and dispatching of light, and can flexibly configure 1 64,1X32,1X16,1X8 or 1X4 optical splitter, which is easy to install.
Product Name: fiber optic fiber box (detailed description)
The access optical cable enters the box through the opening sealing ring, and completes the difference and management without cutting off;
Pigtail, optical disc storage space is sufficient; reasonable go the whole fiber routing design; optical fiber bending radius of not less than 30mm;
Optical fiber cable box (graphic detail), different optical fiber, optical splitter, fiber pigtail jump import and independent and not interfere with each other; for FC, SC, ST and other adapters, flexible configuration and convenient installation.
Cable dividing box [hanging type, wall hanging, hanging rod, pole type, wall type, hoop type, straight weld type, indoor and outdoor] 4 pigtail core 6 core 8 core 12 core 24 core 32 core 36 core 48 core 60 core 72 core 96 core 108 core 144 core optical fiber wiring box,
Fiber melting straight box, fiber branch box, optical fiber distribution box, optical fiber box, optical splitter box, cable dividing box, cable box, cable wiring box, outdoor separating box, indoor distribution box, optical fiber cable box box corridor, corridor,
Wall hanging distribution box, holding pole type distributing box, embedded wiring box.
Advantage:
1. boxes should have enough connection area, and can meet the storage and distribution of the continuous time cable.
2. the cables of different types should have relatively independent access holes, and the hole capacity should meet the requirements of full matching. At present, according to Article 3, with full outdoor and indoor cable (or other indoor cable) to ensure the hole capacity requirements, import should adopt the vertical line.
3. users without the introduction of fiber optic cable stripping, connecting cable fixing pieces to the * * * small pull-out force of not less than 100N.
4. optical fiber in the chassis suitable reserved, reserved length to facilitate the operation of the two times is appropriate.
5. cable holes should be sealed to prevent water and rodents from entering the chassis.
6. to provide a certain number of wire ring or other binding line accessories, convenient binding line basic requirements.
7. set the card slot in the appropriate position in the middle of the cabinet door to put the paper form to fill the fiber.
8., suitable for a variety of use scenarios: indoor, outdoor, hanging wall, hanging pole, new and old real estate.
9. molding box, install backplane design, beautiful appearance and small size, convenient installation, easy to large-scale construction.
10. series of insert integrable wood combination, convenient expansion, investment saving.
11. indoor cable with special card slot design with movable joint into the box, reliable fixation, high efficiency simple cloth.
Product specifications are as follows:
Product name
Product model
PY-LQX
Product specification
Length * width * height (mm)
Remarks
(installation method)
1 point 8 optical splitter box
TF-LQX-08 type
350*340*100 (mm)
Wall hanging and embedded
1 point 16 optical splitter box
TF-LQX-16 type
350*340*100 (mm)
Wall hanging and embedded
1 point 32 optical splitter box
TF-LQX-32 type
450*340*100 (mm)
Wall hanging and embedded
1 point 64 optical splitter box
TF-LQX-64 type
450*340*180 (mm)
Wall hanging and embedded
[professional supply: China Telecom, China Mobile, China Unicom, China Radio and television]
Introduction of optical splitter box:
1 、 insert type fiber optic fiber separate box
Technical parameter:
Slot number
Optical splitter (micro) capacity (unit)
Outline size (mm)
4 slot /2 groove
1 x 4
1 x 8
1 x 16
1 x 32
(high) x (width) * (depth)
4/2
4/2
4/1
One
460 x 340 x 100/350*340*100
Working environment temperature
Of-10 DEG C C 40 (indoor); 40 DEG C 60 (outdoor)
Ambient humidity
(being less than or equal to 85% DEG C) = 95% (indoor); (C 40) (indoor)
atmospheric pressure
70kPa to 106 kPa
Number of optical cable access
1 x 2 roots (upper and lower cables)
Quantity of skin and fiber entering
8 x 4 roots (upper and lower cables)
Opening angle of box door
180 degrees
Grounding drain withstand voltage level
More than 3000V (DC) /10mA/1min
insulation resistance
Over 2 * 500V 1020M.
Fiber optic fiber box (detailed description)
In order to meet the market demand, the Fu Tan communication system is divided into direct melt type, adapter type optical fiber fiber box and box type and insert type optical cable optical fiber splitter box. The box material is made of high quality cold rolled steel, stainless steel or composite material.
It is mainly applicable to corridor or outdoor light spot under FTTH access mode. It is suitable for the first or two level splitting of FTTH, especially for the two stage spectrophotometry. And the bypass fiber connection function is introduced. Direct melt type is small in size and various in configuration,
It is especially suitable for the first stage light distribution mode, placed in the corridor, weak current wells and other occasions.
In addition to the distribution line function, the adapter type fiber distributor has the function of separating light, and can flexibly configure all kinds of different types of optical splitter.
On cable: Cable capacity 16~32 fiber cable SC butterfly butterfly cable pigtail or quick connector to the user terminal. Cable way: indoor upward / downward, outdoor downward.
Separate fiber (splitter) box, suitable for plug in adapter installation.
The modular optical splitter box adopts modular design, with two to four (eight) extended slots, and the optical insert is inserted into the slot. By flexibly increasing the number of optical insert, the port expansion is realized,
The optical modules with different capacities are versatile and interchangeable. The other configuration on the fused fiber disc is used for connecting cable. Pigtail storage uses the adapter for fixed, realizes no jump. The box material is made of high quality cold rolling
