Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

This lighting truss half-moon roof system is new design and hot-sale by ITSCtruss company. It would be your perfect design as for the rental business companies, for it is much more flexible and economic compared with the tradditional  pyramid and other roofing. It is constructed with line truss sections and can be extended to any size as you like just with the common straight truss sections in stock.

1. With connical couper pin trusses sections, easy and quick to set up

2. Beautiful curved roof just with your straight trusses sections in stock, much more ecomonic than other roof style

3. More flexible than the other roof which is fixed in size

1. Contract: EWX/FOB/CIF quotation available in the contract

2. Payment: 30% deposite and balance on the delivery

3. Delivery: Within 7 working days

4. Door to door service by sea is also available if you are not so familiar with the importing process

It takes around 3-4 hours to set up

1. Do clean and check and maintern your trusses regularly

2. Do make a structural calculation for each truss build

3. Do attach loads in nod points

4. Don't mix trusses of multiple suppliers in one construction

5. Don't Exceed the maximum loading of single spans as specified in the loading table

6. Don't attach loads on the trusses diagonals

For the 34x34x25ft half-moon roof system it is just ok for a 20GP container.It would take around 6-45 days to reach to your port depending your country.We deliveried this truss system to our client from Trinida and Tobago, but according to our client's requirement, we shipped it to Miami, USA, and documents are available.It takes 25 days to reach to Miami port.

We produced this halfmoon roof truss system in Feb. 2014. It is 34x34x25ft high; all with aluminum truss sections 390x390mm pin trusses, and 4 tower systems.Below is our team is installing and testing the halfmoom roofing in our old factory site.