Home > Products > Industrial Supplies > Machinery > Convey Belt

Belt conveyor is short for belt conveyor, belt conveyor use the continuous or intermittent movement of conveyor belt conveying various light and heavy goods, can transport a variety of bulk material, also can transport all kinds of cartons, bags and so on for small pieces of goods, wide range of USES.

Product application scope:

WDTII stationary belt conveyor is a general-purpose series product, is the original TD75 machine, two series of DX type (that is, the general type and high strength type), upgrading of new products, which can be widely used in metallurgy, mining, coal, port, power station, building materials, chemical industry, light industry, petroleum and other industries.The unit type multi-unit combined transport system is used to transport materials, which can carry loose densities of 500-2500kg/M3.

WDTII stationary belt conveyor suitable working environment temperature is commonly - 25 to + 40 ℃ for belt conveyor in the special environment, such as heat, cold resistant, waterproof, anti-corrosion, explosion-proof, flame retardant and other conditions, the corresponding protective measures should be taken.

WDTII fixed belt conveyor is designed according to the parts series.Designers can according to the ministry of machine building institute Beijing hoisting and conveying machinery "DTII stationary belt conveyor design choose books", and according to the conveying process requirements, according to different terrain, selection of operating mode was designed and assembled into the whole conveyor.

WDTII stationary belt conveyor's series of components can meet the requirements of horizontal and slant delivery, and can be used with the combination of convex arc, concave arc and straight line.The amount of material that the conveyor allows to transport depends on the bandwidth, the speed, the corner and the inclination, and the frequency of the bulk material.All kinds of bandwidth are applicable

Block degrees, this series of recommendations are selected by the following table.When the hard rock is transported, the bandwidth should be limited to 35MM when the bandwidth exceeds 1200MM, and it cannot increase with wider growth.

The matching relationship between speed V, bandwidth B and throughput IV:

Note: 1, the transmission capacity of Iv value according to the level of transportation, accumulation is 20 ° Angle theta, roller slot Angle calculation of 35 °.

2. The speed (4.5) in the table, (5.6) m/s is the non-standard value, generally not recommended.