Home > Products > Industrial Supplies > Rubber & Plastics Machine

Waste tire pyrolysis plant

As a kind of polymer, waste tire/wheels has aroused more and more social attention. Waste tire recycling can not only reduce the white pollution, but also create profits and ease the energy crisis. In order to achieve the recycling of waste tire, DoingGroup has developed a waste tire pyrolysis plant, but also can be used for waste plastics, waste rubber and other waste reprocessing. This waste tire treatment plant proved to be successful due to some advantages of it:

1. Reactor is produced according to the pressure vessel production standards, the use of 16mm thick boiler special steel and arc compression head, can withstand high temperature and pressure.

2.High-standard 3-step welding process, not easy to crack, long service life.

3. Pinion rotation device, power is small, not directly contact the reactor, less heat transfer, not easy to deformation.

4. The three-stage cooling system adopts tube condensation, which is the most commonly used and best-performing condenser in the oil industry. Ensure that the fuel oil vapor is fully cooled and the oil yield is high.

5. Safety devices have oil-water separator, water seal, vacuum device. To ensure the safe and stable operation of equipment.

 The operation of the waste tire pyrolysis plant is as follows:

Waste tire pyrolysis plant working process

1. The waste plastics and other organic solid waste by the conveyor belt to the bunker by the automatic feeding system to the cracking furnace, rotating the main furnace can control the positive and negative reversing switch control switch to adjust the organic raw materials in the main furnace of the material distribution, the total amount of material control in the total volume below two thirds, close the feed sealing door, and then open the heating system.

2. When the temperature reaches about 150 ℃, gas will be generated (most of the gas is the exhaust gas at this time). When the temperature reaches about 220 ℃, oil and gas will start to enter the multi-function separator. After the multi-function separator, there will be some oil separation down, the pipeline into the residual tank, the pump into the cracking furnace to continue heating cracking.

3. Oil and gas into the cooling system through the multi-function separator, the condensed oil and water flows into the oil-water separator through the pipe for oil-water separation measurement. Under the action of negative pressure, the non-condensable gas enters the micro-vacuum system through the cooling system piping and is filtered again.

4. The pyrolyzed flue gas enters the powerful atomization dedusting tower through the flue pipe to spray dust and cool down, and is discharged into the industrial exhaust gas purifier by the induced draft fan, finally reaching innocuous discharge.

The waste tire pyrolysis plant will produce pyrolysis oil, carbon black, combustible gas.

Fuel oil usage

Fuel Oil: Steel Plant, Boiler Heating, Heavy Oil Generator, Cement Plant.

Carbon black usage

Carbon black: pressure ball burning, refining flour. Which refined flour and can be used for new tires, rubber, plastic, paint manufacturing.

Combustible gas: It is recycled by the equipment for combustion heating of the reactor.

Contact: Ms Bonnie
Phone: +86-371-5677 1821
Mobile/Wechat/Whatsapp:0086-135-2669-2320
Skype: bonniezhao2
Email: oilmachine@doinggroup.com
http://www.wastetireoil.com
http://www.china-doing.com