Home > Products > Industrial Supplies > Machinery > Cutting & Fold-bend Machine

The main purpose

Horizontal universal grinder is mainly used for crushing medium and low hardness materials such as chemicals, dyes, additives, feed, food, medicine, sawdust, chemical fiber and non-metallic minerals. The fineness is adjusted between 20-120 mesh, with the output High-grade, fine granularity, low noise, low energy consumption, simple maintenance, easy installation, etc. Taiwan-type universal grinder is particularly suitable for non-oily, low viscosity, heat-sensitive, fiber (eg: Dendrobium, pepper, ginger, cassava chips, Peanut and soybean, star anise, cinnamon, white sugar, salt crystals, grains, tea, cosmetics, pearls, chemical coatings, etc.

working principle

Table-type universal mill uses the high-speed relative motion seen by the movable tooth plate and the fixed tooth plate, so that the pulverized material is crushed by a combination of the impact of teeth, friction and the impact of the materials between each other. The universal grinder has simple structure, firmness, stable operation and good crushing effect. The crushed material can be directly discharged from the grinding chamber of the main machine, and the size of the crushed material can be obtained through the replacement of mesh screens of different apertures. In addition, the horizontal universal crusher is fully stainless steel. The inner wall of the casing is all machined to achieve a smooth surface, which has changed the phenomenon of rough and powdery deposits on the inner walls of previous models, making the production of medicines, foodstuffs and chemicals more in line with national standards and meeting the requirements of GMP.

Universal Shredder Notice

1. Before use, check whether all fasteners of the machine are tightened.
2. The spindle running direction must conform to the direction of the arrow on the protective cover, otherwise it will damage the machine and may cause personal injury.
3, check the electrical integrity.
4, check the machine crush room with no metal or other hard debris, otherwise it will destroy the tool, affecting the machine operation.
5, the material must be checked before smashing purity, do not allow metal mixed with hard debris, so as not to damage the tool or cause combustion and other accidents.
6. The oil cup on the machine should always be filled with lubricating oil to ensure the normal operation of the machine.
7. Stop feeding before shutting down. If you do not continue to use it, remove the leftovers from the machine.
8. Periodically inspect the tool for damage. If any, replace it immediately.
9. When using the machine body, there will be slight vibration. The handle of the cover must be tightened to avoid accidents.

Universal Shredder Notice

1 Universal crusher in the external power supply should be installed according to the power of the appropriate circuit breaker, the purpose is to overload the machine, the current is too large, automatically cut off the power to protect the motor!
2 The machine is guaranteed to be attended by a person at work.
3 The crushed material particles should not be too large. In case of boring machine, the power should be cut off immediately.
4 If the crushed particles are too large, they should be crushed by the universal crusher and then crushed by the machine.

friendly reminder:
1. Different seasons, different temperatures, and different water temperatures will produce different cooling effects.
2. The heat generated by smashing different materials is different, and the temperature rises differently.
3. The lower the temperature of the water flowing into the water-cooled device, the better the cooling (heat removal) effect.
4. The melting point and ignition point of different materials are different. The user must have a full understanding and grasp of the material being crushed.
5. The water cooling device must be additionally booked and installed.