Home > Products > Chemicals > Chemical Auxiliary & Catalyst > Desiccant & Sorbent

Desiccant rotor properties:

 dehumidity unit wheel

1. Highest desiccant content

The rotor has a very high, 82%, active Silica Gel content. It can be used for most environments and applications. 
The rotor has a very high, 37%, Molecular Sieve content and 45% Silica Gel content. It will perform well when the entering air is dry and/or hot or when the environment is alkaline. It is also suitable when the application calls for a low dew point.  

2. Unique moisture absorption

The media can pick up approximately 40% of its dry weight as moisture in humid environment.
There is no limit for how high relative humidity the rotor can stand as long as the droplets are not introduced into the rotor during operation.

3. Water washable
The rotor can be washed in the water with weak non-alkaline detergent. The rotor should be washed with weak alkaline detergent.

4. High surface strength
The surface compression strength of the rotor is more than 200 kPa.

5.  Variety in construction
The various kind of rotor construction could be made according to the customers’ requirement, such as selection of raw material of the metal parts and with or without flange etc. For the large rotors, the knockdown construction will be very convenience for transportation and assembly on site. 

 Rotor size

Remark: Produce replacement rotors in different sizes to fit most existing dehumidifiers.  

Application: The Silica Gel rotor is used in rotor dehumidifier.