| Model: | BO-SL60-24V(A) |
|---|---|
| Brand: | BRANDO |
| Origin: | Made In China |
| Category: | Consumer Electronics & Lighting / Lighting / LED Lighting |
| Label: | Mining strip light , IP68 led strip light , cuttable strip light |
| Price: |
US $25
/ meter
|
| Min. Order: | 100 meter |
| Last Online:14 Nov, 2024 |
Our plug and play system
Conventional lighting requires separate power and a wired connection to every lamp, needing the expertise of electricians. This becomes labour-intensive and costly when running many meters of lighting. The BRANDO LED Strip Lighting plugs into an existing power source using a power supply which then connects to one end of the LED strip. A single power supply will light a 20 meter LED segment. To extend beyond 20 meters, just add another power supply at the other end and connect the next section of LED strip – it's that simple.
Maintenance-free. Easy to repair.
Damage to lighting through routine underground activities happens. When a conventional lamp is damaged, it results in loss of illumination over many meters – making the affected area a safety hazard until repaired by a qualified electrician. Should a section of the BRANDO strip light be damaged, only this section loses light. The remaining portion of the strip continues to provide illumination – allowing for a safer environment. Additionally, damaged sections can be replaced in 8" strips – making it a quick and cost-effective fix.
• Intelligent temperature management, sensors monitor LED temperature and if safe parameters are exceeded the affected LED’s are automatically dimmed until safe temperatures are restored.
• Intelligent voltage surge management, restorable resistors limit overcurrent and overvoltage situations.
• AC to DC convertors, miniature voltage convertors.
• Short circuit protection, in the case of short circuit the power is isolated until the circuit is normalized.
Dimension: 10000mm(length） *20mm(width） *10mm(height）
TECHNICAL PARAMETERS:
| Part Number | BO-SL60-24V(A) |
| LED Chip | Epistar |
| LED configuration | 72 LED's spaced evenly over a metre length |
| Range fed from both sides | 20 metres |
| Recommended fixing height | 5 - 6 Metres |
| IP Rating | 68 |
| Power Consumption per LED | 0.25 Watts |
| Power Consumption per Metre | 15 Watts |
| Colour Rendering Index CRI | > 80 |
| Colour temperature | 10000 Kelvin |
| Luminous Efficacy | 80 Lumens / Watt |
| Voltage on lighting VDC | 24 VDC |
| Supply voltage for power controllers VAC | 85 - 265 VAC |
| Light maintenance | 15%-20% Drop over 4 years |
| Lifespan | 5 Years |
| Warranty Lighting | 3 Years |
| Outer covering | Food grade silicone |
| Dimensions | 5000mm(length） *20mm(width） *10mm(height） |
| Tensile strength | +-50KG |
| Operating temperature | -40℃ to 120℃ |
| Protection | Short Circuit
Over Voltage Over temperature Over Current |
BRANDO related Mining Strip Light
|
Part Number |
LED configuration |
Range
|
Power/ meter |
Light Source |
Working Voltage |
Luminous Efficacy |
Colour Temperature |
Dimensions |
Outer covering |
IP Rating |
|
BO-SL60-24V(A) |
60 LEDs/m |
20m |
15W |
5050 |
DC24V |
80Lumens / Watt |
10000 Kelvin |
L: 10000mm W: 20mm H: 10mm |
Food grade silicone |
68
|
|
BO-SL60-36V(A)
|
60 LEDs/m
|
40m |
15W |
5050 |
DC36V
|
80Lumens / Watt
|
10000 Kelvin |
L: 10000mm W: 20mm H: 10mm |
Food grade silicone |
68 |
|
BO-SL60-110V(A)
|
60 LEDs/m
|
100m |
15W
|
5050 |
AC110V |
80Lumens / Watt
|
10000 Kelvin |
L: 10000mm W: 20mm H: 10mm |
Food grade silicone |
68 |
|
BO-SL60-220V(A) |
60 LEDs/m |
100m |
15W |
5050 |
AC220V |
80Lumens / Watt
|
10000 Kelvin |
L: 10000mm W: 20mm H: 10mm |
Food grade silicone |
68 |
1, The power supply can drive one length or different lengths within allowed maximum length by feeding
light both ends.
2, To minimize the voltage drop and keep light consistency, position power supply nearest to the power feed end of LED strip light and keep the power line as short as possible.
| Payment Terms: | T/T/ LU/ WU |
|---|---|
