Home > Products > Electronics & Electricity > Telecommunication & Broadcasting > Network Communications Equipment

Product summary:
Fiber jumper(also known as fiber connector) means that connector plugs are installed at both ends of the fiber optic cable to achieve active optical connection; A plug at one end is called tail fiber. The Optic Fiber Patch Cord / Cable is similar to a coaxial cable but does not have a mesh shield. The center is the glass core of light transmission. In multimode fiber, the diameter of the core is 50 μm ~ 65 μm, roughly equivalent to the thickness of human hair. The single-mode fiber core has a diameter of 8 μm ~ 10 μm. The core is surrounded by a glass envelope with a lower refractive index than the core to keep the fiber in the core. On the outside is a thin plastic coat to protect the envelope.
Product Description
Main technical parameters
* Optical fiber outer diameter: φ 0.9 mm, φ 2.0 mm, φ 3.0 mm optional, with PC, UPC, APC options, single mode, multiple mode.
:: Insert loss: ≤ 0.2 dB
:: Echo loss: PC ≥ 40dB, UPC ≥ 50dB, APC ≥ 60dB
:: Interchangeability test: ≤ 0.2 dB
:: Vibration test: ≤ 0.1 dB(10-60 Hz, 1.5 mm amplitude)
:: tensile strength test: ≤ 0.1 dB(0-15Hg tension, except φ 0.9 mm fiber)
:: High temperature test: ≤ 0.2 dB(+85 °C, duration 100 hours)
:: Low temperature test: ≤ 0.2 dB(-40 °C, duration 100 hours)
:: Temperature cycle test: ≤ 0.2 dB(-40 °C ~ +85 °C, after 5 cycles)
* Humidity test: ≤ 0.2 dB(+25 °C ~ +65 °C, relative humidity 93 %, 100 hours later)
:: Commonly used connectors: SC(large head) / LC(small head/FC(spiral) / ST(clip)
Scope of application:
:: Fibre-optic communication systems, fibre-optic access networks, fibre-optic data transmission, fibre-optic CATV, local area network(LAN), test equipment