Home > Products > Computers & AV Digital > Mobile Phone & Accessories > Mobile Phones

Configuration:2G SIM card; 400mAh ; AGPS+LBS; 1.44" TFT;LCD touch screen; Mobile client-side or Computer GPRS service platform, The dual control mode; Language and Time Zone.

Description:Real time GPRS positioning, tracking and monitoring; Phone book; Safety Zones; Watch /SOS/Low Battery Alarm; Weather Forecast; Remote Camera/Shutdown;  Games; Intercom.

Net Weight: 44g.

Product size（dwh/cm）:4.6*4.1*1.3

Colour:  pink/blue/orange.

 

W1（SeTracker2）Use guide

Please read the manual carefully before using the product, in order to go through the installation and setup.The color of the product is subject to the real product.

steps before using the product.

Make sure that the product model is correct and all the accessories are present.

Purchase an internet  enabled GSM SIM card after consulting your product dealer (make sure the device is switched off  BEFORE inserting the SIM card.)

The GSM SIM card need to be GPRS-enabled and have the Caller ID Display function.

Install the client-side app on your mobile. You can ask your dealer regarding the details of the app.

The bar code and QR code is present to assist with registering the user account.

 

For W1,the functions of dialing and voice alert can only use the app2.

1 Product Features

• Base Station Positioning
• Mobile client-side or Computer GPRS service platform, The dual control mode
• Real time GPRS positioning, tracking and monitoring.
• Phone Book (for contact)
• Intercom(Push-to-Talk)
• Track
• Watch Alarm
• Safe Zones
• SOS Emergency Alarm
• Low Battery Alarm
• Weather Forecast
• Remote Shutdown
• Language and Time Zone
• Voice messages saved in cloud
• Flashlight

2  Mobile phone set IP address: Watch mobile phone SIM card installed after boot, set the IP address edit messages sent to watch the SIM card (mobile phone will receive a reply successful information)

Hongkong: pw, 123456, ip,47.91.138.192,8001#

Europe and Africa: pw, 123456,ip, 52.28.132.157,8001#

Asia and Oceania:pw, 123456, ip, 54.169.10.136,8001#

North America: pw, 123456, ip, 54.153.6.9,8001#

South America: pw, 123456, ip, 54.207.93.14,8001#

 

 

 

3 The Key Operating Instructions:
 

Restore:The watch need to be charged if you want to turn it on after restoring.

Flashlight:Press the button continuously to turn on the flashlight,press one more time to turn it off.

 

4  Components of screen display with descriptions.

       

5 Client-side (security guard) Operating Instruction

5.1 APP Login In (You can open the APP after scanning the QR code in the user manual,it will enter the page as shown in the left side of the picture.

5.1 APP Register

You have to manually register first, before you can log in to your account.During the registration process, you can either scan your 15-digit registration code or you canmanually enter the code. Each code is unique so it cannot be used more than once; if the code already had been registered, you will have to ask the commercial agent to restore the corresponding ID number. You need to set up the account using 4-16 numbers or letter., The account is purely exclusive and can not be used repeatedly by anyone else; however, if it is used by anyone else repeatedly, the original user will have to create a new account and register again. Customers can enter the information by themselves and the password can be modified later on if the user forgets it; the registration code, the log-in information and the mobile phone number that the user used to register the account.The registration screen is shown in the figure given below:

 

 

 

5.2 Main Interface Functions Introduction

5.2.1 APP function menu interface

When the account registration is completed,enter your account number and password on the log-in interface and proceed,now you will be taken to the main interface. The main interface as shown in the figure below:

Instructions about some functions:

(1)Voice Chatting:The watch can be sent voice messages to their family and friends.

Mobile phone APP can also send voice messages to the watch.The longest voice message can be 15 seconds.The children can press the sos button to play the voice message.

If the watch need to be sent voice message to the app,long press the record button in order to record his voice messages.The longest voice message is 15 seconds.(There is SMS to remind the parents once the APP receives any voice messages.(The time that you receive the voice messages is related to your network status.)

Send voice messages from the watch to their friends:Long press the record button to record messages.The longest voice message is 15 seconds.

 (2)User Information:You can fill in the information of your children,such as their base info,hobby,etc.

1. Setting:To set up the operating parameters of the watch.

:1：Setting up the SOS number: The user can set up three contact numbers as SOS numbers. In case of an emergency, pressing the SOS key for three seconds will cause the watch to sound an alarm and call the three assigned SOS numbers in turn (in a loop) until someone picks up.If no one answers the numbers, the loop calls will end after 2 rounds.

2：Monitoring:Generally, the phone number assigned to monitoring will be set to that of the parents.After the user begins to use this function,the watch will dial the assigned monitoring phone number.The watch user can not hear the sounds from the mobile,but the mobile can monitor the watch.

 

3：Phone Book (for contacts): You can add 10 phone numbers to watch’s contact book.These 10phone number can be dialed from the watch to initiate Push-To-Talk.

 

4：Looking for the watch:If the user can not find the watch, they can send this instruction to the watch; the watch will then start to ring for the next one minute to make it easier to find it. Turn off the ringing by pressing any key on the watch.

 

5：Voice Alert:Set up and record the schedule alarm,then the watch will remind you in the corresponding time with your schedule.

    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6：Language and Time Zone：Customers through this option set to achieve watch language changes (Note: watch support language according to the number of different types of watches support type and quantity of different time zone) the selected language, click save, (this operation must be can achieve in normal SIM boot after installation watch)

        

 

7：Restoring the default work mode: The default work mode:Open 24 hours a day , upload interval of 10 minutes.

 

8：Remote Shutdown:When the watch has been turned on and has been operating for some time, the user can not press the “Power off” key to turn it off, the watch can only be turned off using the ‘Remote Shutdown’ function from the mobile app.

 (4)Map: Real-time location tracking

The map interface will display the watch and mobile phone’s position(that has the mobile app),tap on “localization”and the watch will begin real-time positioning for three minutes,the upload interval time is 10seconds,after three minutes the watch will restore to the default operating mode.By using the map interface, the user can find out the location of the watch in real-time.

Tracking:You can check the historical tracking according to the time period.The interface of the base station switch refers to the switch of base station point when you are tacking.If you turn it off ,it will not show the location of the base station.

 

 

 

 

 

 

 

 

 

 

 

 

 

(6)Function List:Click the upper-right corner

1：The safety zone:The minimum radius of the safety area is 500 meters.When the user comes into or goes out of the area, it will trigger the alarm.

 

2：Classes disable:You can set up the time to block all the incoming calls during classes.

3：SMS alert settings:Low Battery,SOS, Remove The Watch. These are the three kinds of alarm messages. The watch will send the alarm messages to the assigned phone number. The alarm messages will be charged the same amount of balance as regular messages.Therefore,after this number has been assigned,  it will automatically be added to the monitoring number list by default.

4：Watch Alarm: The user can set three alarms,and they can choose to set up the alarm however they want based on their needs.

5：Love award：Select the number of red hearts within the app, tap on “yes”to send them to the watch,The red hearts will displayed on the watch.

 

6：Information Center:You can check all the alarm record here

 

Safe Zone:The minimum radius of the safety area is 500 meters.When the user comes into or goes out of the area.(If it uses the base station mode,it won’t send the alarm message to the APP.)

 

 

 

 

 

 

 

 

 

 

7：‘‘Personal Setting’’:upper-right corner

 

Notice: You can view the customer registration ID number in the equipment list.If this ID number is different from the one assigned to the watch, the watch will not be able to connect to the app.

 

The “Help”document has more detailed descriptions of all the functions of the watch, so that the customer can carefully understand everything.

 

Switch:If your account is maneging several watches,you can switch them whenever you want.

 

Device:Click the pattern,then the map will update the location of the watch.

 

5.3 Watch alarm instruction

 

If the watch alarms under any circumstances, the companion smartphone app will receive the alarm messages. Tap the “alarm”of the mobile client-side and enter the mobile app’s main interface,here you can get all the information you need about the alarm.

 

6 Watch Work Mode Instructions

 

The watch has three basic working modes which are the ‘normal mode’,the ‘power saving mode’ and the ‘real-time positioning mode’. Different patterns of work have different upload interval times.

 

The normal mode: Upload interval of 600 seconds.

The power saving mode: Upload interval of 3600 seconds.

Real-time positioning mode: Upload interval of 60 seconds.

 

 

7 Additional using instructions for watch.

 

7.1 Watch SOS emergency alarm

 

Long press the “SOS” key (key 2 of watch)f or 3 seconds, there will be an “SOS” prompt displayed on the watch screen and the watch will be in the state of alarming; secondly, it will call the three SOS numbers in a loop for two rounds.If somebody picks up the call, the watch will stop dialing.However, if nobody answers,the watch will stop calling after two rounds.The watch will send an SMS to the monitoring number (off by default). Meanwhile, an alarm notification will also be sent to the companion mobile app.

 

 

7.2 Low Battery Alarm

 

   The watch battery is shown in percentage. When the battery level is less than 20%,the watch will send an alarm SMS to the monitoring number(off by default). Meanwhile, an alarm notification will be sent to the mobile app.

 

7.3 Intercom (Push-To-Talk)

Use the watch to do Push-To-Talk conversation with app: Long press the “Tape” key of the watch to start recording the audio, the voice taping will be sent to the companion app once the key is released.

 

7.4 Voice monitoring

Assign a monitoring number first and the number will be saved to the SMS alerts settings by default.After sending out the instructions for opening the Voice monitoring,the watch will dial the monitoring number,for a one-way call.

 

7.5 Shutdown

The watch can be turned off by pressing the button (without SIM card.)

It can also be turned off by the mobile app via ‘Remote Shutdown’ or by power failure.

 

7.6 The phone book

Set up 10 contact numbers in the phone book of the watch.vShort press the key 1 on the watch to open the phone book,  short press it again to select the desired numbers (the numbers loop from the bottom), press key 1 to dial the selected number.。These 10 phone numbers can be dialed from the watch and used to initiate a Push-To-Talk audio message conversation.

 

7.7 Answer and Hang up the calls

When another watch is calling,shortly press key 1 to pick it up, if the user wants to hang up, just press key 2.

 

7.8 Voice dialing

Use the watch to do Push-To-Talk conversation with app: Long press the “Tape” key of the watch to start recording the audio, the voice taping will be sent to the companion app once the key is released.

 

8 Trouble shooting

1. If the watch is unable to connect to the server after it boots for the first time ,(later, the mobile app will send the prompt that the device is not connected to the internet.)Please check:

 

2）If the SIM card that has been installed inside the watch belongs to the GSM network or not, networks such as Telecom are not supported.

 

2）If the SIM card of the watch is enabled for 2G data traffic or not.The watches currently only can use 2G data traffic,so it must be compatible with 2G data traffic.

 

2）Server Parameters as IP and port,check if the ID is correct and make sure that the ID number of the watch is the same as the one which has been marked on the watch by the manufacturing factory. The Customer can edit the SMS “w,123456,ts#” to the watch by themselves,(the watch has to be turned on with SIM card,and the SMS must be in English input method). The customer can inquire from the agent if they have any questions.

 

4）There are two kinds of situations if the user can not register:

a.Equipment number does not exist or device number has already been registered; under this circumstance,you need to find an agent to solve the problem.

b.Prompt that the account has already been registered by someone,the customer only needs to switch to another account to register again.

 

 

 

 

9 QR code scanning entrance

Scan the QR code, after this you can download the client-side app from the iOS app store or Android App Store.

For T08,the functions of dialing and voice alert can only use the app2