Home > Products > Electronics & Electricity > Electronic Instrument > Analysis Instrument

Industrial Reverse Osmosis Controller CCT-7320

The Reverse Osmosis Controller (RO Controller) CCT-7320 is a combined control instrument of a reverse osmosis controller and an on-line conductivity meter. The RO controller can perform the operation test, status control and on-line monitoring of water quality conductivity (combining PLC controller and conductivity meter). It takes multiple anti-interference measures, adopts unique process flow and graphical control panel with LED indicator lamp embedded, the interface is friendly; menu-driven operation is used, multiple groups of parameters can be set and modified, the requirements of automatic operation are met.

Technical Specifications:

1. Power voltage: AC 220V±15%  50Hz       Power consumption: ≤3W

2. Environment conditions: 1) temperature: 0～50℃;   2) humidity: ≤85%RH

3. Measuring range: 0～20μS /cm，0～200μS /cm，0～2000μS /cm （Fixed range which has been set by the manufacturer and can not be changed by customers: Please indicate which measure range will be needed before placing an order. 200μS /cm or 2000μS /cm ? The ex-factory standard is 0-200μS /cm without prior indication. Except the range, please also let us know you need high pressure flush or low pressure flush program before placing an order）

Note: 0～2000μS /cm is suitable for the equipment with conductivity of the outflow water 100～2000μS /cm,  with conductivity lower than 100μS /cm, measure range 0～200μS /cm or 0～20μS /cm should be selected.                                       Accuracy: 1.5 level

4. Load capacity of output contact: 3A/250V AC (the magnetic valve should be driven through intermediate relay)

5. Operation pressure of conductance cell: 0～0.5Mpa

6.Medium temperature:5～50℃

7.Temperature compensation: automatic temperature with 25℃ as reference temperature

8. Distance of measuring range: less than 30m (the ex-factory configuration of electrode cable is 5m unless there is a special agreement)

9. Display mode: 3 1/2-digit LED digital display

10. Electrode selected: 1.0cm-1

11. outline dimensions: 96×96×110mm (height×width×depth)

   meter board hole: 92×92mm (height×width)