Model: | - |
---|---|
Brand: | Eco-Sources |
Origin: | Made In China |
Category: | Metallurgy , Mining & Energy / New Energy / Solar Energy |
Label: | Solar Panels , Solar Panel Kit |
Price: |
-
|
Min. Order: | 100 pc |
Last Online:12 Jul, 2018 |
The Eco-Sources completed off-grid solar panel kit composed of 6pcs 150W poly solar panels, 1pc 45A charge controller, 1pc 1500W pure sine wave inverter, 1pc solar cable, MC4 Branch connectors, 6 pcs mounting Z brackets, It’s a perfect off-grid solar power system for homes, RVs, trailers, motorhomes, caravans, boats and industrial energy supplementation.
Features
1. Complete 24 volts off-grid solar power kit for charging 24 volts battery bank and DC/AC appliances.
2. High-efficiency silicon solar cells ensure high performance of solar modules and create maximum power output. 25-year transferable power output warranty: 5-year/95% efficiency rate, 10-year/90% efficiency rate, 25-year/80% efficiency rate.
3. Easy to install with pre-drilled holes on the back of panels for fast mounting and securing. Each solar panel comes with 90cm 12awg cable with MC4 Male/Female quick connectors.
4. By-pass diodes are pre-installed in the waterproof IP-65 rated junction box to minimize power drop caused by shade and ensure excellent performance in low-light environments.
Specification
150W Poly Solar Panel
Rated power:150W
Open circuit voltage (Voc):22.4V
Max. Voltage (Vmp):18V
Short circuit current (Isc):9.20A
Max.current (Imp):8.33A
Cell Efficiency(nc):17%
Cell Size:6*6inches/156*156mm
Number. type and arrangement of cells:36pcs Poly-Crystalline Silicon(4*9)
Module Efficiency(nm):15.1%
Max-System Voltage(VDC):1000v
Output Power Tolerance:±3%
Temperate coefficient of Isc:+0.05%/ ℃
Temperate coefficient of power Voc:-0.38%/℃
Operating Temperature range:-40℃~+90℃
SLA Battery Voltage:12V
Size:59.1″*26.4″*1.6″ (1500*670*40mm)
Weight:26.5lbs/12kg
Cable Length:35.4inches/900mm
1500W Off Grid Pure Sine Wave Inverter
Output Volt: 100/110/120VAC
Continuous Power: 1500W
Surge Power: 3000W
FREQUENCY: 60Hz
Efficiency: >90%
USB Output: 5V
Input Range: 21-30VDC
Working Input: 24VDC
Fuse: 20A
Low battery alarm: 21+0.5V
Low battery shut down: 20+0.5V
Over voltage shut down: 30.5+0.5V
Overload shut down: 1800W over 10 seconds
Overheating shut down: >75℃
Over Thermal Protection: shut down the output
Working Temperature: -10℃~+50℃
45 A PWM Solar Charge Controller
Regulator with timer and light sensor
maximum charging current: 45A
maximum loading current: 45A
Rated voltage: 12/24v
temperature compensation: -4.7mv/cell· °C
environment temperature:-20 °C ~ +50 °C
working tacitly approved: charge off voltage 13.8v/27.6v (±0.2)
load off voltage: 10.8v/21.6v (±0.2)
load on voltage: 12V / 24V (±0.2)
Connection: The charge controller has 3 pairs of 2 terminals, Solar, Battery and Load, pls connect your battery to Battery terminals, the Load terminals to DC loads you might have, and your PV array to the Solar terminals.
Installation
1. Connect your 24 volts battery bank to the Battery terminals of charge controller.
2. Connect the DC load you might have to the Load terminals of charge controller.
3. Connect PV (Solar) array to Solar terminals of the controller.
4. Connect DC terminals of the inverter to your battery.
5. Connect AC output of the inverter to your AC appliances.