Home > Products > Industrial Supplies > Machine Hardware > Other Machine Hardware

FIXREP@IR Repair Wrap Structural Material, with high strength and elasticity, is made from flexible fiberglass knit fabric tape saturated with water-activated polyurethane. After being water-activated it can create a rigid structure with high ability of anti-bending and anti-elongation, and chemicals-resistance.

FIXREP@IR Repair Wrap Fiberglass repair tape is used in emergency repair and protection of pipelines which carry water, gas and chemicals in civil and military industrial use. It has played an important role in the fields of power supply, chemicals transportation, marine and communication engineering by reducing losses caused by pipeline leaking or damage, and has become the necessary part in emergency repair and pipeline maintenance. The quality and the performance of our products have been proved excellent by some authoritative institutes and big customers.

FIXREP@IR Repair Wrap Fiberglass repair tape is packed in aluminum foil pouch with nitrogen. It can be operated easily without requirement of extra equipment. The only step required is infusing water into the pouch and then wrapping it onto the cables or pipelines. The material will form a tough durable covering that sets in 20-30 minutes.

Repair Almost Anything!

• Fast Cure Time(10Minutes)
• Waterproof 150psi
• Cold and Heat Resistant(-45℃-150℃)
• Permanent Results

POSSIBLE USES                SIZES

Tools                    5cm x 127cm    

Pipes                    5cm x 150cm    

Auto                    7.5cm x150cm    

Gear                    10cm x 150cm   

Package : Color box.

Accessories :1 pair of gloves,1sand paper ,1instruction

Application : fixrep@ir Repair Wrap can be used for repairing and fixing electrical wires,water pipes,gas pipes,oil tubes,plastics,PVC,aluminum,metal,rubber,and more!

fixrep@ir Repair Wrap is flammable resistant,water-proof and fireresistant (-45℃-150℃).It is suitable for home and industrial use .It can nearly fix anything and wrap delicately.Fully cures in 10 minutes and 6hours with full strength!It is an essential supplement for any tool box.

How to Use?

1.Clean the repair area with abrasive material.

2. Wear protective gloves .

3.Remove the roller of the tape from the vacuum bag and immerse it in water at room temperature for 2-5seconds..

4.Press the tape roller out of excess water.

5.For pipeline leaking repairing,apply steel epoxy putty onto the leaking area .For other applications,no need steel epoxy putty.

6.Wrap the belt roller around the breakage/crack location in several layers(Wrap 4-8 layers. The number of layer is varied for different application),maintaining the tension.For more durable repairs,it is recommended to wind the tape also 5-7cm from the place of breakage in both directions.

7.Distribute impregnation evenly over the entire area of the tape hands pressing with effort.

8.Wait 8-10minutes till the tape is dry.

9.The tape reaches its maximum strength in 24hours.

It is allowed to grind and color the tape to give the place of repair esthetic appearance.

Hazard description: In case of direct contact,irritate the skin and eyes.