| Model: | KSF415 |
|---|---|
| Brand: | Kanglida or OEM |
| Origin: | Made In China |
| Category: | Home Supplies / Personal Care Appliance |
| Label: | polymer splint , splint , polyester |
| Price: |
US $2.4
/ pc
|
| Min. Order: | 500 pc |
| Last Online:22 Aug, 2018 |
Klida orthopedic splint is composed by manifold layers of orthopedic casting tapes and specially non woven fabrics. It is characterized by better viscosity, fast drying time, high rigidness after dying and light weight. Due to better bio compatibility, polyurethane is widely used in medical places. Animal study and acute and chronic toxicity test have proved that medical polyurethane was non-toxic and no-induced distortion, no local irritation and no allergic reaction.
Specification
A.Fiberglass Material
|
model |
size |
packing |
|
KSF 312 |
7.5CM X 30 CM |
20bags * 6boxes/ctn |
|
KSF 335 |
7.5CM X 90 CM |
10 bags * 6boxes/ctn |
|
KSF 415 |
10.0CM X 40 CM |
15 bags * 6boxes/ctn |
|
KSF 430 |
10.0CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSF 530 |
12.5CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSF 545 |
12.5CM X115 CM |
5 bags * 6boxes/ctn |
|
KSF 630 |
15.0CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSF 645 |
15.0CM X 115 CM |
5 bags * 6boxes/ctn |
B.Polyester Material
|
model |
size |
packing |
|
KSP312 |
7.5CM X 30 CM |
20bags * 6boxes/ctn |
|
KSP 335 |
7.5CM X 90 CM |
10 bags * 6boxes/ctn |
|
KSP 415 |
10.0CM X 40 CM |
15 bags * 6boxes/ctn |
|
KSP 430 |
10.0CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSP 530 |
12.5CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSP 545 |
12.5CM X115 CM |
5 bags * 6boxes/ctn |
|
KSP630 |
15.0CM X 75 CM |
10 bags * 6boxes/ctn |
|
KSP 645 |
15.0CM X 115 CM |
5 bags * 6boxes/ctn |
Package
1pc/bag,5bags/box,6boxes/carton
1pc/bag,10bags/box,6boxes/carton
1pc/bag,15bags/box,6boxes/carton
1pc/bag,20bags/box,6boxes/carton
How to use splint
1) Select proper specification according to the surgery position
2) Put the pad (cotton coil or cotton slipcover) on the surgery position.
3) Immerse the roll in room temperature water(21-24°C) for 4-6 seconds and squeeze it 2-3 times firmly. If the water warmer than 21-24°C shortens the immersing time, while cooler than 21-24°C water lengthens the time.
4)Take the splint out and press out excrescent water;Absorb water drip of the splint surface with towel.
5) Put the splint on the fixed position, molding it according to need. Mold it in 3-5 minutes after immersing in water because after that time it will concretion. Allow about 10 minutes for sufficient concretion and let patients not move during this time. It could bear electric weight after 20 minutes.
6) Fix the splint with gauze bandage or elastic bandage after concretion .
