Home > Products > Security & Protection > Alarm

All in one access control, automation, security systems for 36Eur (MOQ 1000pcs),  49 EUR (MOQ 100pcs) or 71 EUR (MOQ 10pcs )
UPC: 99989897969062

Application example:
Input D1 on the module GTalarm2 measures the temperature of a chamber or
oven with a temperature sensor. GTalarm2 monitors the temperature from the
input D1, which is also used by the control loop as feedback for heat control.
When the temperature goes out-side the normal range defined by the useradjustable,
alarm set points, OUT1 energizes an audible alarm and an indicator
lamp to get the operator’s attention.
- The signal from Input D1 is the one the GTalarm2 monitors against the
alarm set point.
- The signal to the output indicates when the alarm has occurred. The alarm
message could be send to the user in case of temperature alarm whether
or not there is an output attached
- The output could drive external devices as shown in this example.
- Enter names for inputs, outputs to make the application easier to
understand.
- Sensors calibration is possible
- If output activation in case of alarm events is needed, please configure
required parameters in "Sensors/ Automation" window.