Home > Products > Electronics & Electricity > Other Electrical & Electronic

Model ID

NPM-TT2

PCB
dimensions
(mm)

PC size

Single-lane mode

L 50 x W 50 ~ L 510 x W 590

Dual-lane mode

L 50 x W 50 ~ L 510 x W 300

M size

Single-lane mode

L 50 x W 50 ~ L 510 x W 510

Dual-lane mode

L 50 x W 50 ~ L 510 x W 260

PCB exchange time

Single-lane mode

4.0 s (With no component mounted on the reverse side of PCB)

Dual-lane mode

0 s* *No 0s when cycle time is 4.0 s or less

Electric source

3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA

Pneumatic source

Min.0.5 MPa, 200 L /min (A.N.R.)

Dimensions *1 (mm)

W 1 300*2 x D 2 798*3 x H 1 444*4

Mass

2 690 kg
(Only for main body:This differs depending on the option configuration.

Placement head

Lightweight 8-nozzle head
(Per head)

3-nozzle head V2 *5
(Per head)

Placement speed

PC size

18 000 cph (0.20 s/chip)

7 200 cph (0.50 s/chip)
5 900 cph (0.61 s/QFP)

M size

17 460 cph (0.21s/chip)

6 984 cph (0.52 s/chip)
5 723 cph (0.63 s/QFP)

Placement accuracy
(Cpk1)

± 40 µm/chip
± 30 µm/QFP 12mm to 32mm
± 50 µm/QFP 12mm Under

±40 μm/ chip
±30 μm/ QFP

Component
dimensions
(mm)

0402 chip*6 to L 32 x W 32 x T 12

0603 chip to L 150 x W 25 (diagonal152) x T 30

Component
supply

Taping

Tape : 4 to 56 / 72 mm

Tape : 4 to 56 / 72 / 88 / 104 mm

Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm)

Stick

Specifications for front/rear tray feeders : Max.12 (Single stick feeder)

Specifications for front/rear feeder carts : Max.28 (Single stick feeder)

Tray

Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20)