Home > Products > Industrial Supplies > Machine Hardware > Spring

US-3D wire forming machine is a high-precision, high-efficiency, reasonable structure, convenient to use, simple deb ing wire forming processing equipment.
1.German style design and craft production
2. The computer is turned on and off quickly, and the operation is simple and convenient. The computer interface can change the program while adjusting the speed while producing
3. Production can achieve no change in the angle at the slowest corner, and the production stability is better. Smart template, automatic check and alarm
4. Bearings, gears, guide rails and other important parts use imported accessories, the equipment is durable and reliable, and maintains accuracy for a long time
5. Protection device, collision avoidance machine, compound tool complete all procedures, low wear and tear of wearing parts
6. The configuration adopts imported industrial computer, WINDOWS operating system, multi-language display and easy operation.
7. High precision, can be used for wire forming products within the range of 3.0-12mm wire diameter, the error is reduced to 0.1mm
8. Supporting the use of automatic wire feeding rack, making the machine's line changing operation more convenient

1. Correct installation and placement
After the machine is placed in the workshop, it needs to be fully grounded. During the transportation process, the manufacturer has a wooden board at the bottom, and the wooden board needs to be removed.
Put on a rubber pad. The purpose of doing this is to prevent the production of the wire molding machine from vibrating due to the operation of the machine.

2. Add oil and butter regularly
The refueling locations are mainly crimping, wire feeding boxes, and transmission gears, etc., and the organic oil lubrication of the running-in part of the wire molding machine is maintained for a long time
Usually check the butter once a week.

3. Keep the machine clean
Every day before work, employees need to wipe the surface of the wire forming machine clean. If it is not cleaned for a long time, oil will accumulate, and the circuit parameters will change.
The possibility, and the long-term erosion of dust, make the surface of the machine aging and affect the appearance.

4, use in normal operation
Special care should be taken not to produce products outside the wire diameter range, so as not to reduce the accuracy of the equipment. The machine needs to be placed in a ventilated and dry place
To prevent moisture from rusting or damaging the circuit. The timely and careful maintenance of the machine can maintain the accuracy and stability of the wire forming machine,
Extending the service life can also reduce the repair rate of the machine.