Home > Products > Electronics & Electricity > Electric Control System

YET402PC-V2.0

Two-way Wireless Intelligent Receiving Controller

I. Overview

YET402PC-V2.0 (Two-way Wireless Intelligent Receiving Controller) produced by our company can output switching signals for two relays, so that the equipment to be controlled can meet the requirements of the positive and reverse of the motor, or the on-off conversion of the switch and various special control procedures. Mainly used in electric doors, windows, lifting equipment, gates, lifts, industrial control and security industries and other fields.

The wireless receiving controller has the characteristics of high confidentiality, large storage capacity, stable performance and low power consumption, and is easy to use. It does not need to use traditional jumper or dial switch coding. It only needs the wireless signal transmitted by the remote controller to be received and stored by the receiving controller to realize the matching use. If the learned remote controller is lost in the use process, only the information stored in the receiving controller is cleared. The lost remote controller will not be able to control the receiving controller remotely. In order to regain the right of use, it must be re-studied by the host before it can be used.

2. Controller Characteristics

This product is a universal intelligent controller, which can be used with most wireless remote controllers on the market, including fixed code (2262, 2260, 2264, 5326, M1E, M5E, etc.), learning code (1527, 2240, 6P20B, 6P20D, etc.), rolling code (HCS301, HCS300, HCS200, HCS201, HCS100, HCS101, etc.) and some customized remote controllers (CAME, NICE Flro, etc.).

3. The Method and Procedure of Learning and Coding

Press the learning button on the controller, release the learning button when the LED light is on, and the controller enters the learning state (when the LED is off), then press the remote control button that needs to control the controller. When you see the LED flash of the controller five times, it goes out, indicating that you have learned successfully. The learning button 1 of the controller corresponds to the relay 1, and the learning button 2 corresponds to the relay 2. The control modes are all point-operated.

If the remote controller is lost, in order to make the remote controller completely invalid, it should press the learning key 1 or the learning key 2 (more than 5S) for a long time. When the LED lights go out, the controller will automatically clear the contents of the memory. To reuse it, you just need to learn it again.

IV. Major Technical Indicators

1. Working Voltage: DC9-24V

2, Static Working Current: <7mA

3. Working temperature: -40℃ - +80℃ 

4. Receiving sensitivity: >-112 dBm

5. Working frequency: 315MHz, 433MHz (optional).

6. Contact current: <3A

7. Remote control capacity: 400

8, size: 94*60*28.5 mm