Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink
Product Description
Advanced Features
- Dual ESC can reach continuous 200A big current, give your board strong power
- One PCBA board integrate two FSESC6 ’s function by internal CAN BUS circuit connection.
- The mater and slave board connection can be switched On/Off
- Preserve Bluetooth module and RF module connections for both master and slave board
- Aluminum anodized Heat sink with fins design for better heat dissipation
- Compact size with heatsink: 120x91x20mm (L*W*D)
- PCB layers: 8layers, thickness: 3oz/layer, total 24 oz thickness
Spec:
- Hardware: V 6.6
- Firmware: VESC_default_no_hw_limits
- Voltage: 8V - 60V (Safe for 3S to 12S LiPo) for the dual ESC
- Voltage spikes may not exceed 60V
- Current: Continuous 100A single, total 200A , Instantaneous current 400A per single, total 800A for system instantaneous current.
- 5V 1.5A output for external electronics for single
- 3.3V 1A output for external electronics for single
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047
- 6 shunts in dual system. Each is measurable for the current.
Product Image
Send Inquiry to this Member
Related Products of this Company
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please
click here.
China Suppliers Quick Searching:
,
